Tesla Model 3, Model Y | EV Cockpit | Car Monitor Lock | Wind & Dash | 15W | Cooling Wireless Charging | MagSafe Car Phone holder | MCM Power III Car Mount | TouchScreen FlipArm-15

Paired with TouchScreen FlipArm 155

For the EV owner who swore they'd never ruin that screen.

Highlights

• Designed for the back of touchscreen displays.
• Push-down locking flip arm. Mechanical, satisfying operation.
• Phone peeks from the screen's side. View completely clear.
• Reinforced vacuum suction. Strong hold, no residue.
• Protects the minimalism of your future-forward cockpit. 

Overview

The best technology is invisible until you use it. FlipArm mounts behind the screen. Your phone ghosts out from the side. The cabin stays pure, factory-clean. Convenience has arrived. Silently.

The most beautiful tech is the one you don't see, but always feel. Protect your futuristic cockpit. It starts behind the screen.

You just picked up your brand-new electric vehicle. That massive center screen is your proudest interior centerpiece. You swore nothing would ruin that pure tech aesthetic. But you still need a place for your phone. FlipArm suctions behind the display. The phone peeks out from the edge. From the driver's seat, the interior remains untouched. Only you know the perfect little helper hiding back there. Push. Lock. Flip. Mechanical satisfaction every time.

Why You Need This

No flat space on that minimalist EV dash? The dead space behind your screen is premium real estate.

Don't want to ruin the futuristic cockpit vibe? Mounted completely out of sight. A ghost of convenience.

Worried screen heat will weaken suction? Reinforced vacuum plus PU gel. High heat, no softening.

Every visible mount screams for attention. CAPDASE FlipArm only whispers your phone into existence. One demands to be the main character. The other plays the perfect supporting role.

CAPDASE Cooling 15w Wireless Charging Mount – MCM Power III

Fast Magnetic Wireless charging + Active COOLING. For MagSafe iPhones & Qi smartphones.

No more falling, overheating, or slow charging.
Most car chargers overheat, slip, or need perfect alignment. This one doesn’t.

Strong magnetic grip – 8 N-52 neodymium magnets snap your phone instantly into place. No clamps, no slipping, even on bumpy roads.

Active cooling – built‑in electro‑ceramic module with a quiet fan pulls heat away while charging. You feel the cold. Your battery stays safer, charging stays faster.

Why drivers love it:
• Instant magnetic attachment – just hover and click
• Holds phone firm – no drops, no wobble
• Active cooling prevents overheating
• Fast wireless charging up to 15W
• Works with MagSafe iPhones directly, or use included metal plate for any phone/case
• Ultra‑thin metal ring (0.6mm) – barely visible
• Auto alignment for perfect charging
• Over‑voltage, over‑current, over‑temperature & short‑circuit protection

What you get:
A cool, rock‑solid magnetic charger. No more overheating, slow charging, or phones falling off the vent.

Specifications

Input: DC 12V/2~3A; 9V/2~3A
Output: 5W / 7.5W / 10W / 15W
Transmission distance: ≤10mm
Efficiency: ≥80%
Recharge port: USB-C
Dimension: Ø65 × 42.5 mm
Cable included: USB-C to USB-C
Magnetic design: 8 pieces of N-52 neodymium iron bars (4.5mm width each), nickel‑plated
Anti‑slip: Fiberglass board
Cooling: Electro‑ceramic module + semiconductor plate + cooling fan (stepper motor for low noise)
Compatible with: MagSafe iPhones & any Qi‑enabled smartphone
Included accessories: Metal ring plate (0.6mm thin, 53mm diameter) + magnetic plate
Case compatibility: Recommended thickness ≤2mm for best cooling & charging
Fast charging requirement: Needs separately sold QC 3.0 car charger or any >18W car charger
Fast charging support (iPhone): Up to 15W (Qi standard)

Notes:
• Cooling fan & plate work only when input power >9V
• Cooling fan stops when phone is removed
• Cooling disabled below 20°C ambient temperature (NTC)
• Cannot charge through metal cases or cases >3mm thick
• Non‑Qi phones will not charge wirelessly

搭配TouchScreen FlipArm 155

產品亮點:

• 專為電動車中控螢幕背面設計
• 下壓式鎖定翻轉臂，機械感操作
• 手機從螢幕側邊探頭，不擋視野
• 強化真空吸盤，穩固不殘膠
• 守護未來座艙的極簡美學 

產品概述:
最美的科技是你看不見它卻用得到它。FlipArm 吸附在屏幕背後，手機如幽靈般從側邊浮現。座艙依然純淨如原廠設計，便利卻已悄然到位。

最美的科技，是你看不見它，卻用得到它

守護你的未來座艙，從螢幕背後開始

你剛提了一台嶄新電動車，那塊巨大中控螢幕是你最驕傲的內裝核心。你發誓絕不讓任何東西破壞這份科技美感。但你確實需要一個放手機的地方，FlipArm 吸附在螢幕背面，手機從側邊探出頭來。從駕駛座看，內裝依然純淨如初。只有你知道，那裡藏著一個完美的小助手。一推、一鎖、一翻，機械感十足。

購買理由模組：

• 電動車儀表台沒位置貼支架？屏幕背後那片閒置空間，正是黃金席位
• 不想破壞座艙的未來感？吸附在背面完全不外露，便利幽靈般存在
• 擔心屏幕高溫、支架脫落？強化真空加PU凝膠，高溫不軟腳

所有你看得見的支架，都在忙著證明自己的存在。而 卡登仕CAPDASE FlipArm，只忙著證明手機的存在。一個是主角，一個是配角。

CAPDASE 冷卻 15W 無線充電支架 – MCM Power III
快速磁吸無線充電 + 主動冷卻。適用於 MagSafe iPhone 及 Qi 智能手機。

不再跌落、過熱或充電緩慢。
大多數車用充電器會過熱、滑動，或者需要完美對位。這一個不會。

強勁磁吸 – 8 粒 N-52 釹磁鐵，瞬間將手機吸附到位。無需夾具，即使在顛簸路面也不會滑動。

主動冷卻 – 內置電陶冷卻模組及靜音風扇，充電時將熱力帶走。你會摸到冰涼感覺。電池更安全，充電更快速。

車主喜愛的原因：
• 即時磁吸 –只需靠近即可吸附
• 穩固固定手機 – 不會跌落，不會搖晃
• 主動冷卻防止過熱
• 快速無線充電高達 15W
• 可直接用於 MagSafe iPhone，或使用附帶的金屬片用於任何手機/手機殼
• 超薄金屬環（0.6mm）– 幾乎看不見
• 自動對位，完美充電
• 過壓、過流、過熱及短路保護

你會得到：
一個清涼、穩固的磁吸充電器。不再過熱、不再慢速充電、不再有手機從風口跌落的煩惱。

規格
輸入：DC 12V/2~3A；9V/2~3A
輸出：5W / 7.5W / 10W / 15W
傳輸距離：≤10mm
效率：≥80%
充電端口：USB-C
尺寸：Ø65 × 42.5 mm
隨附線材：USB-C 轉 USB-C
磁吸設計：8 粒 N-52 釹鐵磁條（每粒 4.5mm 闊），鍍鎳表面
防滑：玻璃纖維板
冷卻：電陶冷卻模組 + 半導體製冷片 + 散熱風扇（配備步進馬達，低噪音）
兼容：MagSafe iPhone 及任何 Qi 無線充電智能手機
隨附配件：金屬環片（0.6mm 超薄，直徑 53mm）+ 磁吸金屬片
手機殼兼容：建議厚度 ≤2mm，以達最佳冷卻及充電效果
快速充電要求：需另購 QC 3.0 車充或任何 >18W 的車充
iPhone 快速充電支援：高達 15W（Qi 標準）

注意事項：
• 散熱風扇及製冷片僅在輸入功率 >9V 時運作
• 移除手機後散熱風扇會停止
• 當環境溫度低於 20°C 時，冷卻功能會關閉（NTC 熱敏電阻）
• 無法透過金屬手機殼或厚度超過 3mm 的手機殼充電
• 不支援非 Qi 制式的手機進行無線充電

卡登仕CAPDASE，為考慮周全、從容應對每一種狀況的你。