MagSafe Car Mount | Round Vent Clip-77| Magnetic Mount | Squarer II Powerful magnetic grip.

SQUARER II Magnetic Car Mount

Powerful magnetic grip. One hand operation. Sleek design.

Highlights:

• Just hover and it locks — one-hand attach, one-hand release
• 24 high-performance magnets — zero movement on sharp turns
• Slim square design — low-profile, no blocked vents
• Works directly with MagSafe — no case removal needed
• Door to navigation in one second flat 

Overview:
How many seconds do you lose every morning fighting with your car mount? Coffee in one hand, laptop bag in the other, yet you're still wrestling to pry open the clamps, wedge your phone in, lock it down — then fiddle with the angle. Those 15 seconds of chaos set the tone for your entire day.

The SQUARER II was designed to delete that routine entirely. Inside its sleek body sit 24 high-performance neodymium magnets that lock onto your phone with industrial-level grip.

Just hover your phone near the mount — it snaps into place instantly. Navigation lights up. When you arrive, just grab and go. No levers. No squeezing. Just smooth, effortless motion.

And the slim square design? It barely looks like a mount at all. More like a piece of your car's interior that was always meant to be there.

Your car deserves a mount as smart as your phone.

Why You'll Love It:

• Hands full, but you still need to set up navigation→ Hover-to-lock magnetic attachment, one hand only→ From car door to GPS in 1 second, not 15
• Weak magnets let your phone drop on sharp turns→ 20x N52 + 4x N45 neodymium magnet array→ Stays locked in place, even on the tightest bends
• Bulky mounts block vents and ruin your car's look→ Slim square design, compact and discreet→ Clean dashboard aesthetic, no clutter
• New phone isn't MagSafe, so your old magnetic mount is useless→ Free metal ring and plate included→ Any phone becomes magnetic in seconds 

More than a mount. A better way to interact with your car.

Some mounts demand two hands, a firm grip, and a prayer — relics from a bygone era of clunky mechanics. Other magnetic mounts promise a strong hold, but leave you holding your breath through every corner.

We offer something different: true effortlessness. Hover to lock. Grab to go. So secure, you'll forget the word "drop" was ever in your vocabulary. The gap between us and them? It's the gap between "tool" and "experience."

Buy with total confidence.

• Order online, shipped with care: Your order is packed securely and delivered straight to your door.
• Easy install, no tools needed: Clips onto your vent in seconds. Done.
• Free metal ring included: Don't have a MagSafe phone? Stick on the included metal ring or plate, and your phone becomes magnetic instantly.
• We're here to help: Got a question during install or use? Reach out anytime. Our team is happy to assist. 

Tech Specs:

• Magnet type: N52 + N45 neodymium, nickel-plated for corrosion resistance
• Magnet count: 20x N52 + 4x N45 — 24 high-performance magnets total
• Faceplate material: Fiberglass-reinforced board — prevents slip, boosts magnetic hold
• Installation: Tool-free, clips directly onto air vent
• Compatibility:
• iPhone with MagSafe: Direct magnetic attachment
• Non-MagSafe phones: Includes free metal ring / metal plate — stick on and go
• Note: Magnets may slightly affect compass apps — normal function returns when phone is removed 

CAPDASE. For those who drive smarter and demand a better experience.
We design better setups for the way you live and work.

Paired with Round Vent Clip 77
Round & Circular Air-Vent Phone Mount Clip

If your car has round vents, most mounts give up. This one locks on—one hand, one twist, done.

Who it’s for

·        Drivers with round or circular air vents who are tired of mounts that slip, fall, or don’t fit.

·        People who want a fast, one-hand setup with no glue, no suction cup, and no tools.

·        Daily commuters, rideshare drivers, delivery drivers, and road-trippers.

·        Passengers who want their own screen on the passenger-side vent.

·        Anyone who wants a clean, simple mount that stays put and adjusts easily.

Where different people like to mount it

·        Center vent: For drivers who want GPS at eye level and within easy reach.

·        Driver-side vent: For solo drivers who want a close, clean setup.

·        Horizontal vent: For low-profile drivers who want a steady hold.

·        Vertical vent: For compact dashboards and narrow spaces.

·        Round / circular vent: For cars that other mounts ignore - finally, a mount that locks onto the louver.

Parameter

·        Exclusive lock for most round and circular air-vent louvers→ Fits the vents other mounts can’t. No more “my car has round vents, nothing works.”

·        One-hand clamp with auto-lock footrest→ Snap it on with one hand. It locks itself. No tools, no frustration.

·        Swivel ball-head rotating joint→ Tilt and turn to your best angle. Less glare. Less neck strain.

·        Compatible with most horizontal or vertical vents→ Works with common vent types, so you’re not stuck with a useless mount.

Core Pains

1.     Your old vent mount slides off your round vents. You hear a crash. Your phone is on the floor.

2.     You need two hands to install it, and it still feels loose. Every bump makes you nervous.

3.     It sags down, blocks the AC, or puts your phone at a bad angle. So you stop using it.

Why you’ll love it
Most vent mounts are made for flat vents. Your car has round vents. That’s the problem.
The Round Vent Clip 77 locks onto round and circular louvers. It clamps with one hand.

The auto-lock footrest keeps it tight. The swivel ball-head lets you set your perfect angle.
Get in. Clip it. Go. No tools. No glue. No drama.

Quick Spec.

·        Mount type: Round / circular vent clip with auto-lock footrest

·        Vent fit: Most round and circular air-vent louvers; compatible with most horizontal or vertical vents

·        Installation: One-hand clamp, auto-lock

·        Angle: Swivel ball-head rotating joint

·        View: Adjustable to your best angle

·        Use: Car, truck, SUV, rideshare, daily driving

·        Tools: No tools needed

·        Adhesive: No glue, no suction cup

·         

Ready for a mount that actually fits your Round Vents ?
Get the CAPDASE Round Vent Clip 77 - One-hand lock, smooth angle control, and a grip that stays where you put it.

SQUARER II Magnetic Car Mount磁吸車用手機支架

強力磁吸・單手操作・型格設計

產品亮點:

• 一靠即合，單手取放，瀟灑俐落
• 超強磁力陣列，顛簸過彎絕不偏移
• 纖薄方形設計，不遮視線不佔空間
• 無需拆殼，MagSafe 直接相容
• 上車到出發，只需一秒 

產品概述:
你有沒有算過，每天早上上車，你要花多少時間跟支架搏鬥？雙手提著咖啡和公事包，卻還得費力掰開夾臂、塞進手機、扣緊 - 最後還要調整角度。那 15 秒的狼狽，是每一天混亂的開端。

SQUARER II 就是為了終結這種瑣碎而誕生。它內建 24 顆高效能釹磁鐵，吸附力道強到像焊上去一樣。你只需單手將手機往上一靠，瞬間鎖定，導航畫面立刻亮起。下車時，一拿即走，乾淨俐落。纖薄的方形設計，不遮擋出風口，不破壞車內美感，更像是一件低調的車內藝術品。

你的車，值得一個和手機一樣聰明的支架。

購買理由：

• 雙手滿載，還要費力裝支架 → 靠近即吸附，單手完成 → 上車設定導航，從 15 秒變 1 秒
• 磁吸力道不夠，過彎就摔 → 20 顆 N52 + 4 顆 N45 釹磁鐵陣列 → 顛簸過彎，手機紋絲不動
• 支架體積龐大，遮擋視線又醜 → 纖薄方形設計，低調俐落 → 維持車內美感，不擋出風口
• 換手機後，舊磁吸支架不相容 → 隨附金屬貼環，任何手機都能用 → 一貼即變磁吸，相容零門檻

不只是換支架，是換一種與車相處的方式

有些支架，需要你雙手並用、費力掰開，像在操作上個世代的機械。有些磁吸支架，吸力勉強及格，卻總在關鍵過彎時讓你心驚膽跳。

而我們要給你的，是真正的從容：一靠即合，一拿即走，強到讓你忘了「掉落」兩個字怎麼寫。這之間的差距，就是「工具」與「體驗」的距離。

讓你的購買，毫無負擔

• 線上落單，安心送達： 你的訂單將被妥善包裝，快速配送到你手中。
• 輕鬆安裝，無需求人： 無需任何工具，一夾一貼，幾秒鐘就能完成安裝。
• 附贈金屬貼環： 非 MagSafe 手機，貼上隨附的金屬環或金屬片，即刻變身磁吸手機。
• 隨時支援： 安裝或使用上有任何疑問，歡迎隨時聯絡我們，我們的團隊樂意為你提供協助。 

技術規格:

• 磁鐵規格：N52 + N45 釹磁鐵，鎳鍍層防鏽處理
• 磁鐵數量：20 顆 N52 + 4 顆 N45，共 24 顆高效磁鐵陣列
• 面板材質：玻璃纖維增強面板，防滑並提升磁吸力
• 安裝方式：免工具，直接固定於出風口
• 相容性：
• iPhone MagSafe：直接吸附
• 非 MagSafe 手機：隨附金屬貼環 / 金屬片，貼上即可使用
• 注意事項：磁鐵可能輕微影響指南針應用程式，移除後即恢復正常

卡登仕CAPDASE. 為懂得聰明駕駛、講究體驗的你。
We design better setups for the way you live and work.

搭配Round Vent Clip 77
圓形與環形出風口手機支架夾

如果你的車是圓形出風口，大多數支架直接投降。這款能鎖上——單手、一轉，搞定。

適合誰
•車上是圓形或環形出風口，受夠支架滑落、掉下或裝不上的駕駛。
•想要快速、單手安裝，免膠、免吸盤、免工具的人。
•每日通勤族、叫車司機、外送司機與公路旅行族。
•想在副駕出風口擁有自己螢幕的乘客。
•任何想要乾淨、簡單、固定牢靠又容易調整的支架的人。

不同人士喜歡安裝的位置
•中央出風口：適合想把 GPS放在視線高度、又伸手可及的駕駛。
•水平出風口：適合低調派駕駛，想要穩定夾持。
•垂直出風口：適合緊湊儀表板與狹窄空間。
•圓形／環形出風口：適合被其他支架忽略的車款 -終於有支架能鎖在百葉上。

參數
•專屬鎖定設計，適用多數圓形與環形出風口百葉 →別家支架裝不上的出風口，它能裝。不再有「我的車是圓形出風口，什麼都不能用」。

•單手夾持，附自動鎖定腳托 →單手一扣就上。它會自動鎖緊。免工具，不煩躁。

•萬向球頭旋轉接頭 →傾斜、轉動到你的最佳角度。減少反光，減少頸部痠痛。

•相容多數水平或垂直出風口→常見出風口類型都能用，不會買到一個沒用的支架。

核心麻煩

1.   舊的出風口支架從圓形出風口滑掉。你聽到「啪」一聲。手機躺在地上。

2.   你需要兩隻手才能裝，裝了還是鬆鬆的。每次顛簸都讓你緊張。

3.   它下垂、擋住冷氣，或讓手機角度很糟。最後你乾脆不用了。

為什麼你會愛上它
大多數出風口支架是為平面出風口做的。你的車是圓形出風口。問題就在這裡。
Round Vent Clip 77能鎖上圓形與環形百葉。單手就能夾上。
自動鎖定腳托讓它保持緊密。萬向球頭讓你設定完美角度。
上車。夾上。出發。免工具。免膠。免麻煩。

快速規格
•支架類型：圓形／環形出風口夾，附自動鎖定腳托
•出風口適用：多數圓形與環形出風口百葉；相容多數水平或垂直出風口
•安裝：單手夾持、自動鎖定
•角度：萬向球頭旋轉接頭
•視角：可調整至你的最佳角度
•用途：車、卡車、SUV、叫車、每日駕駛
•工具：免工具
•黏著：免膠、免吸盤

準備好迎接真正適合你的圓形出風口的支架了嗎？
CAPDASE Round Vent Clip 77 -單手鎖定、順暢角度控制，夾住就不跑位。