MagSafe Car Mount | Clip On Arm-145| Dashboard| Magnetic Mount | Squarer II Powerful magnetic grip.

SQUARER II Magnetic Car Mount

Powerful magnetic grip. One hand operation. Sleek design.

Highlights:

• Just hover and it locks — one-hand attach, one-hand release
• 24 high-performance magnets — zero movement on sharp turns
• Slim square design — low-profile, no blocked vents
• Works directly with MagSafe — no case removal needed
• Door to navigation in one second flat 

Overview:
How many seconds do you lose every morning fighting with your car mount? Coffee in one hand, laptop bag in the other, yet you're still wrestling to pry open the clamps, wedge your phone in, lock it down — then fiddle with the angle. Those 15 seconds of chaos set the tone for your entire day.

The SQUARER II was designed to delete that routine entirely. Inside its sleek body sit 24 high-performance neodymium magnets that lock onto your phone with industrial-level grip.

Just hover your phone near the mount — it snaps into place instantly. Navigation lights up. When you arrive, just grab and go. No levers. No squeezing. Just smooth, effortless motion.

And the slim square design? It barely looks like a mount at all. More like a piece of your car's interior that was always meant to be there.

Your car deserves a mount as smart as your phone.

Why You'll Love It:

• Hands full, but you still need to set up navigation→ Hover-to-lock magnetic attachment, one hand only→ From car door to GPS in 1 second, not 15
• Weak magnets let your phone drop on sharp turns→ 20x N52 + 4x N45 neodymium magnet array→ Stays locked in place, even on the tightest bends
• Bulky mounts block vents and ruin your car's look→ Slim square design, compact and discreet→ Clean dashboard aesthetic, no clutter
• New phone isn't MagSafe, so your old magnetic mount is useless→ Free metal ring and plate included→ Any phone becomes magnetic in seconds 

More than a mount. A better way to interact with your car.

Some mounts demand two hands, a firm grip, and a prayer — relics from a bygone era of clunky mechanics. Other magnetic mounts promise a strong hold, but leave you holding your breath through every corner.

We offer something different: true effortlessness. Hover to lock. Grab to go. So secure, you'll forget the word "drop" was ever in your vocabulary. The gap between us and them? It's the gap between "tool" and "experience."

Buy with total confidence.

• Order online, shipped with care: Your order is packed securely and delivered straight to your door.
• Easy install, no tools needed: Clips onto your vent in seconds. Done.
• Free metal ring included: Don't have a MagSafe phone? Stick on the included metal ring or plate, and your phone becomes magnetic instantly.
• We're here to help: Got a question during install or use? Reach out anytime. Our team is happy to assist. 

Tech Specs:

• Magnet type: N52 + N45 neodymium, nickel-plated for corrosion resistance
• Magnet count: 20x N52 + 4x N45 — 24 high-performance magnets total
• Faceplate material: Fiberglass-reinforced board — prevents slip, boosts magnetic hold
• Installation: Tool-free, clips directly onto air vent
• Compatibility:
• iPhone with MagSafe: Direct magnetic attachment
• Non-MagSafe phones: Includes free metal ring / metal plate — stick on and go
• Note: Magnets may slightly affect compass apps — normal function returns when phone is removed 

CAPDASE. For those who drive smarter and demand a better experience.
We design better setups for the way you live and work.

Pairedwith Clip On Arm-145
Clip-On Phone Holder Arm for Dashboard, Sun Visor & Rearview Mirror

One-Line Hook
Stop balancing your phone on your lap. Clip it where you actually look - dashboard, sun visor, or mirror - in seconds.

Who it’s for

·        Drivers who hate suction cups, sticky pads, screws, and vent mounts that block AC.

·        Rideshare, taxi, delivery, truck, and van drivers who need fast, one-hand setup.

·        Families and road-trippers who want a screen for the passenger.

·        Renters and company-car users who need a mount they can move.

·        Anyone who wants one holder for car, home, or office.

·         

Where different people like to mount it

·        Dashboard overhang: For low-profile drivers who want the phone near the center console without blocking vents. 

·        Sun visor: For passengers, kids, and co-pilots who want their own screen. 

·        Rearview mirror area: For rideshare and delivery drivers who want navigation in their line of sight. Check local laws. Do not block the mirror. 

·        Home / office: For desks, kitchens, treadmills, and video calls. 

Parameter

·        Lip-clip design→ Clips to dashboard overhangs, sun visors, and rearview mirrors. No glue, no screws, no marks. 

·        Spring return hinge→ Strong grip that stays put on bumpy roads. Less worry. Less repair money. 

·        Rubber mats on clamps→ Protects your car surface from scratches and pressure marks. 

·        Adjustable arm, multi-directional rotation→ Turn the phone to your best angle—driver, passenger, or back seat. 

·        Ball socket, portrait or landscape→ GPS in portrait. Videos in landscape. Switch in a second. 

·        Swivel ball-head→ Fine-tune the angle to avoid glare and neck strain. 

·        Anti-vibration / no wobble→ Stable screen. Easy to read. Safer driving. 

·        Car and home use→ One holder for your car, desk, kitchen, or rental.

Core Pains

1.     Your phone slides off the seat or lap. You look down to find it. That is unsafe and annoying. 

2.     Your suction cup falls off in the heat. Your sticky pad leaves glue. Your dashboard looks worse. 

3.     Your vent mount does not fit, blocks the AC, or overheats your phone. So it sits in the glove box.

Why you’ll love it
Most mounts are a fight. This one is a clip. It grabs dashboard edges, sun visors, and mirrors. It holds tight. It rotates and tilts to fit your view. It comes off fast when you change cars.

No tools. No glue. No drama.

Quick Spec.

·        Mount type: Lip-clip with spring return hinge

·        Placement: Dashboard overhang, sun visor, rearview mirror, home/office surfaces

·        Arm: Adjustable, multi-directional

·        View: Portrait or landscape

·        Angle: Ball socket + swivel ball-head

·        Protection: Rubber mats on clamps

·        Stability: Anti-vibration, no wobble

·        Use: Car, truck, SUV, rental, home, office

·        Installation: Tool-free, removable, no damage

Ready for a phone holder that actually stays where you put it ?
Get the CAPDASE Clip On Arm-145 - simple, secure, and made for real life.

We design better setups for the way you live and work.

SQUARER II Magnetic Car Mount磁吸車用手機支架

強力磁吸・單手操作・型格設計

產品亮點:

• 一靠即合，單手取放，瀟灑俐落
• 超強磁力陣列，顛簸過彎絕不偏移
• 纖薄方形設計，不遮視線不佔空間
• 無需拆殼，MagSafe 直接相容
• 上車到出發，只需一秒 

產品概述:
你有沒有算過，每天早上上車，你要花多少時間跟支架搏鬥？雙手提著咖啡和公事包，卻還得費力掰開夾臂、塞進手機、扣緊 - 最後還要調整角度。那 15 秒的狼狽，是每一天混亂的開端。

SQUARER II 就是為了終結這種瑣碎而誕生。它內建 24 顆高效能釹磁鐵，吸附力道強到像焊上去一樣。你只需單手將手機往上一靠，瞬間鎖定，導航畫面立刻亮起。下車時，一拿即走，乾淨俐落。纖薄的方形設計，不遮擋出風口，不破壞車內美感，更像是一件低調的車內藝術品。

你的車，值得一個和手機一樣聰明的支架。

購買理由：

• 雙手滿載，還要費力裝支架 → 靠近即吸附，單手完成 → 上車設定導航，從 15 秒變 1 秒
• 磁吸力道不夠，過彎就摔 → 20 顆 N52 + 4 顆 N45 釹磁鐵陣列 → 顛簸過彎，手機紋絲不動
• 支架體積龐大，遮擋視線又醜 → 纖薄方形設計，低調俐落 → 維持車內美感，不擋出風口
• 換手機後，舊磁吸支架不相容 → 隨附金屬貼環，任何手機都能用 → 一貼即變磁吸，相容零門檻 

不只是換支架，是換一種與車相處的方式

有些支架，需要你雙手並用、費力掰開，像在操作上個世代的機械。有些磁吸支架，吸力勉強及格，卻總在關鍵過彎時讓你心驚膽跳。

而我們要給你的，是真正的從容：一靠即合，一拿即走，強到讓你忘了「掉落」兩個字怎麼寫。這之間的差距，就是「工具」與「體驗」的距離。

讓你的購買，毫無負擔

• 線上落單，安心送達： 你的訂單將被妥善包裝，快速配送到你手中。
• 輕鬆安裝，無需求人： 無需任何工具，一夾一貼，幾秒鐘就能完成安裝。
• 附贈金屬貼環： 非 MagSafe 手機，貼上隨附的金屬環或金屬片，即刻變身磁吸手機。
• 隨時支援： 安裝或使用上有任何疑問，歡迎隨時聯絡我們，我們的團隊樂意為你提供協助。 

技術規格:

• 磁鐵規格：N52 + N45 釹磁鐵，鎳鍍層防鏽處理
• 磁鐵數量：20 顆 N52 + 4 顆 N45，共 24 顆高效磁鐵陣列
• 面板材質：玻璃纖維增強面板，防滑並提升磁吸力
• 安裝方式：免工具，直接固定於出風口
• 相容性：
• iPhone MagSafe：直接吸附
• 非 MagSafe 手機：隨附金屬貼環 / 金屬片，貼上即可使用
• 注意事項：磁鐵可能輕微影響指南針應用程式，移除後即恢復正常 

卡登仕CAPDASE. 為懂得聰明駕駛、講究體驗的你。
We design better setups for the way you live and work.

搭配Clip On Arm-145
儀表板、遮陽板與後視鏡用:唇夾式手機支架臂

別再把手機放在腿上搖搖欲墜。夾在你真正會看的位置-儀表板、遮陽板或後視鏡 -幾秒鐘搞定。

適合誰 ?
•討厭吸盤、黏膠、螺絲，以及會擋住冷氣的出風口支架的駕駛。
•需要快速、單手安裝的叫車、計程車、外送、卡車與廂型車司機。
•想讓乘客也有自己螢幕的家庭與公路旅行族。
•需要可移動支架的租車族與公司車使用者。
•想用一顆支架搞定車內、家裡或辦公室的人。

不同人士喜歡安裝的位置
•儀表板邊緣：適合低調派駕駛，想把手機放在中控台附近，又不擋出風口。
•遮陽板：適合乘客、小孩與副駕，想要自己的專屬螢幕。
•後視鏡附近：適合叫車與外送司機，想把導航放在視線範圍內。請遵守當地法規，勿遮擋後視鏡。
•家裡／辦公室：適合書桌、廚房、跑步機與視訊通話。

參數
•唇夾式設計 →可夾儀表板邊緣、遮陽板與後視鏡。免膠、免螺絲、不留痕。
•彈簧回彈鉸鏈→夾力強，顛簸路面也穩穩不動。少一點擔心，少一筆維修費。
•夾具附橡膠墊 →保護車內表面，避免刮傷與壓痕。
•可調式臂、多向旋轉→把手機轉到你的最佳角度——駕駛、乘客或後座都適用。
•球窩接頭，直向或橫向 →導航用直向，影片用橫向，一秒切換。
•萬向球頭 →微調角度，避開反光與頸部痠痛。
•防震／不晃動 →畫面穩定、讀取容易、行車更安全。
•車用與家用 →一顆支架搞定車內、書桌、廚房或租車。

核心麻煩

1.   手機從座椅或腿上滑掉。你低頭找手機。既不安全又煩人。

2.   吸盤遇熱就掉。黏膠留下殘膠。儀表板看起來更糟。

3.   出風口支架裝不上、擋住冷氣，或讓手機過熱。最後只能躺在手套箱裡。

為什麼你會愛上它
多數支架都在跟你打架。這款只要一夾。它抓住儀表板邊緣、遮陽板與後視鏡。夾得牢。能旋轉、能傾斜，配合你的視角。換車時也能快速拆下。
免工具。免膠。免麻煩。

規格
•支架類型：唇夾式，附彈簧回彈鉸鏈
•安裝位置：儀表板邊緣、遮陽板、後視鏡、家裡／辦公室表面
•臂：可調式、多向旋轉
•視角：直向或橫向
•角度：球窩接頭 +萬向球頭
•保護：夾具附橡膠墊
•穩定性：防震、不晃動
•用途：車、卡車、SUV、租車、家用、辦公室
•安裝：免工具、可拆卸、不傷表面

準備好迎接真正固定在你要的位置的手機支架了嗎？
CAPDASE Clip On Arm-145 -簡單、穩固，為真實生活而生。