Your Cart is Empty
Car Diffuser
Essential oils capture the "essence" of a plant through the distillation of mechanical pressing. Essentially, these oils are concentrated extracts that retain, or magnify the fragrance and effect of their source.
HR-BMW-MCM2-BMWX5
M-CM Power II Ceramic Cooling Fast Wireless Charging Magnetic Car Mount DSH Base-BMWX5 for BMW X5 & X6 (2014-2018)
$365.00
Special design for:
BMW X5(2014-2018)
BMW X6 (2014-2018)
Description:
CAPDASE M-CM Power II Mount - Fast Wireless Charging Magnetic Car Mount focuses on an Innovative and Smarter mounting solution. Specifically designed with MagSafe magnetic mounting compatibility. It is constructed with 8 pieces of 4.5mm width N-52 Neodymium magnetic iron bar with a nickel-plated surface that produces Powerful attraction. It is equipped with Fiberglass Board. When attaching the device, it can prevent slippery and also strengthen the magnetic attraction. Holding your iPhone 14/13/12 Extremely Firm & Secure without any concerns, the device will never drop out even while driving in any rough terrain.
Built-in advanced Electro-Ceramic Cooling Module with Smart Semiconductor cooling plate and Cooling fan. It will absorb the heat and dissipate the heat during the wireless charging period, protect the phone's safety and improve the wireless charging efficiency. It also embeds a stepper motor to minimize the noise.
It is equipped with a Qi Standard transmitter. It delivers a 5W/ 7.5W/ 10W/ 15W power segment, allows fast charging wirelessly at 7.5W, compatible with Qi-enabled iPhone 14/13/12 models. It provides a seamless and perfect user experience, keeping your iPhone 14/13/12 safely, enjoying viewing, and operating unobstructedly, as an excellent companion in your car.
Provided free magnetic plate and metal plate, It acts as a media attachment to the back of a smartphone or case without magnetic feature, just stick it either Round Plate or Metal Ring onto the back of the Smartphone or outside its slim case, to turn your smartphone into iPhone’s MagSafe magnetic feature at the back.
DSH Base - BMWX5
Compatible with :
BMW X5(2014-2018)
BMW X6 (2014-2018)
Description:
CAPDASE M-CM Power II Mount - Fast Wireless Charging Magnetic Car Mount focuses on an Innovative and Smarter mounting solution. Specifically designed with MagSafe magnetic mounting compatibility. It is constructed with 8 pieces of 4.5mm width N-52 Neodymium magnetic iron bar with a nickel-plated surface that produces Powerful attraction. It is equipped with Fiberglass Board. When attaching the device, it can prevent slippery and also strengthen the magnetic attraction. Holding your iPhone 14/13/12 Extremely Firm & Secure without any concerns, the device will never drop out even while driving in any rough terrain.
Built-in advanced Electro-Ceramic Cooling Module with Smart Semiconductor cooling plate and Cooling fan. It will absorb the heat and dissipate the heat during the wireless charging period, protect the phone's safety and improve the wireless charging efficiency. It also embeds a stepper motor to minimize the noise.
It is equipped with a Qi Standard transmitter. It delivers a 5W/ 7.5W/ 10W/ 15W power segment, allows fast charging wirelessly at 7.5W, compatible with Qi-enabled iPhone 14/13/12 models. It provides a seamless and perfect user experience, keeping your iPhone 14/13/12 safely, enjoying viewing, and operating unobstructedly, as an excellent companion in your car.
Provided free magnetic plate and metal plate, It acts as a media attachment to the back of a smartphone or case without magnetic feature, just stick it either Round Plate or Metal Ring onto the back of the Smartphone or outside its slim case, to turn your smartphone into iPhone’s MagSafe magnetic feature at the back.
DSH Base - BMWX5
Compatible with :
- BMW X5 (2014-2018)
- BMW X6 (2014-2018)
- Hook on the middle of the two air vents on the front desk, below the emergency button
Advanced Electro-Ceramic Cooling Module
Advanced Electro-Ceramic Cooling Module with Smart Semiconductor cooling plate and cooling fan can dramatically decrease the temperature when it is wireless charging. You can actually feel the blizzing cold with your finger!
M-CM II Power holder
• Simplicity with refined look matches iPhone with a Fast + Wireless transmitter
• Fully compatible with Qi Standard enabled Smartphones
• Built-in advanced Electro Ceramic Cooling Module
• Dramatically decrease the temperature when it is wireless charging
• Specifically designed with MagSafe compatible magnetic mounting solution
• Instant grip-on when hovering the device near the magnetic area
• Reimagined & Perfect gear to hold the device Extremely Firm and Secure
• Automatically aligns it for charging and improved faster efficiency
• Prevent over-voltage, current, temperature, and short-circuit protection
Highlight
- Built-in advanced Electro Ceramic Cooling Module
- Dramatically decrease the temperature when it is wireless Charging
- Specifically designed with MagSafe compatible magnetic mounting solution
- 8 pieces of 4.5mm width N-52 Neodymium magnetic iron bar with nickel-plated surface provides Powerful attraction
- Fiberglass Board when attached to the device prevents slippery and also strengthens the attraction
Fast Wireless Charging
It delivers a 5W, 7.5W, 10W, and 15W power segment, allows fast charging wirelessly, and is compatible with Qi-enabled Smartphone models.
Specification:
Input: DC 12V/2~3A; 9V/2~3A
Output: 5W / 7.5W / 10W / 15W
Transmission Distance: ≤10mm
Efficiency: ≥ 80%
Recharge port: USB-C
Dimension: Ø65*42.5 mm
USB-C To USB-A Cable included
Metal Ring plate
Made by Premium Metal material design to attach securely
Only 0.6mm Ultra-thin and easily snap on most Magsafe devices
Durable and stable
Diameter: 53mm
Thickness: 0.6mm
Notes:
• Recommended using with iPhone 14/13/12 models directly and/or worn with official MagSafe protective cases.
• Not recommended to use it with non-MagSafe cases and/or non-Magnetic cases.
• Supports up to 7.5W fast-charging by Qi standard for iPhone 14 requirement.
• Recommended any smartphone models without magnetic feature to use the bundled Magnetic Plate or Metal Ring
• When NTC (Thermistor) detects the ambient temperature is below 20 degrees, the cooling fan and the cooling plate will stop operating until the temperature rises again.
• The cooling fan will stop when the smartphone is removed.
• The cooling plate and cooling fan only work when the input power is above 9V.
• It is recommended to use a Smartphone case with a thickness of less than 2mm
• It will affect the cooling function of the cooling plate if the Smartphone case is thicker than 2mm
Gentle reminder:
• Please be sure the M-CM power holder is connected with the power source before using
• Cannot charge if the smart device is worn with a metal case, or the case is thicker than 3 mm.
• The wireless charging will not work with any non-Qi enabled smartphone
Wireless charging notes:
It uses electromagnetic fields to transfer power from a transmitting source *, to a receiving device * for charging the device’s battery wirelessly
Transmitting source: M-CM Power holder
Receiving device: Qi-enabled Smartphones
Best performance: 3-5mm
Standard: Qi Standard
Fast charging notes
Qi-enabled devices which do not support fast charging will be powered at a standard charging speed
Required a separately sold QC 3.0 Car charger or Car charger higher than 18W to support fast charging
Attention to the power output of the charging source of the car charger will affect the charging speed performance