Cooling | 15W Wireless Charging Mount | MagSafe MCM Power III Car Mount | Gooseneck Arm 300mm

CAPDASE Cooling 15w Wireless Charging Mount – MCM Power III

Fast Magnetic Wireless charging + Active COOLING. For MagSafe iPhones & Qi smartphones.

No more falling, overheating, or slow charging.
Most car chargers overheat, slip, or need perfect alignment. This one doesn’t.

Strong magnetic grip – 8 N-52 neodymium magnets snap your phone instantly into place. No clamps, no slipping, even on bumpy roads.

Active cooling – built‑in electro‑ceramic module with a quiet fan pulls heat away while charging. You feel the cold. Your battery stays safer, charging stays faster.

Why drivers love it:
• Instant magnetic attachment – just hover and click
• Holds phone firm – no drops, no wobble
• Active cooling prevents overheating
• Fast wireless charging up to 15W
• Works with MagSafe iPhones directly, or use included metal plate for any phone/case
• Ultra‑thin metal ring (0.6mm) – barely visible
• Auto alignment for perfect charging
• Over‑voltage, over‑current, over‑temperature & short‑circuit protection

What you get:
A cool, rock‑solid magnetic charger. No more overheating, slow charging, or phones falling off the vent.

Specifications

Input: DC 12V/2~3A; 9V/2~3A
Output: 5W / 7.5W / 10W / 15W
Transmission distance: ≤10mm
Efficiency: ≥80%
Recharge port: USB-C
Dimension: Ø65 × 42.5 mm
Cable included: USB-C to USB-C
Magnetic design: 8 pieces of N-52 neodymium iron bars (4.5mm width each), nickel‑plated
Anti‑slip: Fiberglass board
Cooling: Electro‑ceramic module + semiconductor plate + cooling fan (stepper motor for low noise)
Compatible with: MagSafe iPhones & any Qi‑enabled smartphone
Included accessories: Metal ring plate (0.6mm thin, 53mm diameter) + magnetic plate
Case compatibility: Recommended thickness ≤2mm for best cooling & charging
Fast charging requirement: Needs separately sold QC 3.0 car charger or any >18W car charger
Fast charging support (iPhone): Up to 15W (Qi standard)

Notes:
• Cooling fan & plate work only when input power >9V
• Cooling fan stops when phone is removed
• Cooling disabled below 20°C ambient temperature (NTC)
• Cannot charge through metal cases or cases >3mm thick
• Non‑Qi phones will not charge wirelessly

Paired with Gooseneck Arm 300mm

For the one who commands big rigs and bigger roads.

Highlights

• 300mm extended reach. Built for deep dashboards in trucks and large SUVs.
• Bend it anywhere. Full articulation, hold any angle.
• Optional support base. Zero bounce, zero droop. Even on washboard roads.
• 360° ball head. Portrait, landscape, one flick. 

Overview

Stop lunging for your phone across a massive dashboard. This 300mm gooseneck brings the screen right to your eyeline. Add the support base and kill that cheap wobble for good.

Your rig is huge, your dash is deep, your navigation shouldn't be a guessing game. Pull it close. Bend it into place. The screen floats exactly where your eyes need it.

You dominate the vehicle. Now dominate your sightline.

Why You Need This

Long arms usually wobble like crazy. Our optional support base braces against the dashboard—solid as bedrock on the roughest terrain. Finally, peace of mind that lasts the whole haul.

Short arms compromise your view. Generic long arms test your patience. CAPDASE Gooseneck 300mm makes you forget the mount exists. Just endless, unobstructed road ahead.

CAPDASE. For those who command the big picture.
We design better setups for the way you drive.

Optional – pairing with bundled Air Vent-Clip

For the one who always has a backup that still looks good.

Highlights

• One-click install. Fits most vent types.
• Soft rubber padding. Blades stay pristine.
• Built-in ball head. Angle freely.
• Minimalist design. Doesn't ruin interior flow.

CAPDASE. For those who think ahead and handle every situation with composure.

CAPDASE 冷卻 15W 無線充電支架 – MCM Power III
快速磁吸無線充電 + 主動冷卻。適用於 MagSafe iPhone 及 Qi 智能手機。

不再跌落、過熱或充電緩慢。
大多數車用充電器會過熱、滑動，或者需要完美對位。這一個不會。

強勁磁吸 – 8 粒 N-52 釹磁鐵，瞬間將手機吸附到位。無需夾具，即使在顛簸路面也不會滑動。

主動冷卻 – 內置電陶冷卻模組及靜音風扇，充電時將熱力帶走。你會摸到冰涼感覺。電池更安全，充電更快速。

車主喜愛的原因：
• 即時磁吸 –只需靠近即可吸附
• 穩固固定手機 – 不會跌落，不會搖晃
• 主動冷卻防止過熱
• 快速無線充電高達 15W
• 可直接用於 MagSafe iPhone，或使用附帶的金屬片用於任何手機/手機殼
• 超薄金屬環（0.6mm）– 幾乎看不見
• 自動對位，完美充電
• 過壓、過流、過熱及短路保護

你會得到：
一個清涼、穩固的磁吸充電器。不再過熱、不再慢速充電、不再有手機從風口跌落的煩惱。

規格
輸入：DC 12V/2~3A；9V/2~3A
輸出：5W / 7.5W / 10W / 15W
傳輸距離：≤10mm
效率：≥80%
充電端口：USB-C
尺寸：Ø65 × 42.5 mm
隨附線材：USB-C 轉 USB-C
磁吸設計：8 粒 N-52 釹鐵磁條（每粒 4.5mm 闊），鍍鎳表面
防滑：玻璃纖維板
冷卻：電陶冷卻模組 + 半導體製冷片 + 散熱風扇（配備步進馬達，低噪音）
兼容：MagSafe iPhone 及任何 Qi 無線充電智能手機
隨附配件：金屬環片（0.6mm 超薄，直徑 53mm）+ 磁吸金屬片
手機殼兼容：建議厚度 ≤2mm，以達最佳冷卻及充電效果
快速充電要求：需另購 QC 3.0 車充或任何 >18W 的車充
iPhone 快速充電支援：高達 15W（Qi 標準）

注意事項：
• 散熱風扇及製冷片僅在輸入功率 >9V 時運作
• 移除手機後散熱風扇會停止
• 當環境溫度低於 20°C 時，冷卻功能會關閉（NTC 熱敏電阻）
• 無法透過金屬手機殼或厚度超過 3mm 的手機殼充電
• 不支援非 Qi 制式的手機進行無線充電

搭配300毫米鵝頸臂

亮點:

• 300mm超長延伸，極適合大車儀表台
• 全向彎曲，手機角度隨心所欲
• 可選支撐底座，長臂從此不晃不垂
• 360°球頭，直橫切換一秒完成 

概述:
開大車的你再也不用危險探身去取手機。這支300mm鵝頸臂能把屏幕送到你視線正前方，加上支撐底座，從此告別長臂必晃的廉價感。

大車儀表台太遠，導航看不清？一拉一彎，屏幕浮現眼前。貼身指揮中心。

你的視野有多大，支架就該有多長駕馭你的龐然大物，別讓它駕馭你的視線

購買理由：

• 長支架總是晃到讓人煩躁？可選支撐底座直接頂住儀表台，顛簸路面依然穩如磐石，給你前所未有的安心感

短臂是委屈你的視線，一般長臂是考驗你的耐心。卡登仕CAPDASE Gooseneck 300mm，讓你忘記支架的存在，只享受無邊的視野。

卡登仕CAPDASE，為懂得掌控全局的你。

We design better setups for the way you drive.

可選 - 與隨附的空調出風口夾搭配使用

亮點:

• 一鍵安裝，兼容多數出風口
• 軟膠護墊，不傷葉片
• 內建球頭，角度自由調整
• 極簡設計，不破壞內裝美感

卡登仕CAPDASE，為考慮周全、從容應對每一種狀況的你。