HR00-AA3T01
Description:
CAPDASE AA Power III Mount focuses on providing an innovative and smarter mounting solution. It is equipped with cutting-edge auto-sensor technology to detect and determine the best wireless charging overlay position through the current and voltage generated by the transmitting coil of the holder and the receiving coil of the smartphone. The operation involves identifying and positioning by automatically adjusting the interior coils to find the maximum current position, achieving optimal charging performance. Once aligned correctly, it tightly clamps the smartphone automatically. It is the ultimate gear for different smartphone models for drivers and passengers.
The mount is equipped with a Qi standard transmitter and delivers 5W/ 7.5W/ 10W/ 15W power segments, allowing fast wireless charging with Qi-enabled smartphone models. The intelligent clamp locking system is engineered with a coil inductor. The clamps will open automatically when starting the car engine and effortlessly self-release by touching a sensing button located at the top of the back, even when the car engine is off.
It embeds a stepper motor to minimize noise and also includes a built-in NPO capacitor to lower the temperature while charging. With dual wireless charging coils, it is compatible with foldable (folded state) and flippable phones (both flipped open and closed). It is flexible enough to adjust the display to an optimal viewing angle. With full access to device controls and ports, either in landscape or portrait viewing, it allows convenient navigation, calling, audio, video, and internet browsing while enjoying wireless and fast charging at the same time. It is a perfect companion in the vehicle, ensuring safe and fast charging while driving.
Telescopic Arm Pro-141
Air Vent-Clip (optional)
• A satisfying visual sense of technology and design outlook with compact size
• Automatic identification with both coil location of Smartphone & Holder
• Auto-adjusting the supporting legs when performing the alignment
• To maximize charging efficiency once aligned correctly & tightly clamping Smartphone automatically
• Built-in Supercapacitor, the clamp is self-releasing by touching the top sensing button on the back even the engine is off
• Equipped with advanced torque stepping motor, More stable and Noise reduction with Anti-shake from the clamp
• Automatic Alignment Memory System, remembers the coil position of Smartphone model aligned from last time
• Delivers 5W/ 7.5W/ 10W/ 15W power segment, allows fast charging wirelessly compatible with Qi-enabled smartphone models
• Anti-slip silicone mat pads on both clamps and supporting legs prevent scratching the device.
• Prevent over-voltage, current, temperature, and short-circuit protection.
• A built-in supercapacitor can also release the clamp even when the car engine is turned off.
Supports 7.5W fast-charging Qi-standard iPhone 12, 13, 14 requirement.
Gentle reminder:
• Please be sure the AA Power III holder is connected with the power source before using it.
• The clamp operates by a button located at both side.
• Cannot charge if the Smart device is worn with a metal case or the case is thicker than 3 mm.
• The wireless charging and will not work with any non-Qi-enabled smartphone.
Wireless charging notes:
• It uses electromagnetic fields to transfer power from a transmitting source *, to a receiving device * for charging the device’s battery wirelessly.
• Transmitting source: AA Power III holder.
• Receiving device: Qi-enabled Smartphones.
• Best performance: 3-5mm
• Standard: Qi Standard
Fast charging notes:
• Qi-enabled devices which are not supported fast charging will be powered at a standard charging speed.
• Required a separately sold QC 3.0 Car charger or Car charger higher than 18W to support fast charging.
• Attention to the power output of the charging source of the car charger will affect the charging speed performance.
Input:12V / 1.5 A, 9V / 1.67A, 5V / 2A
Output:15W / 10W / 7.5W / 5W
Standard: Qi Standard
Charging distance: ≤ 10mm
Charging efficiency:≤ 80%
Input port: USB-C
Product Dimension: Ø72.5* 74 * 116.3 mm
Clamps width: 58-86mm
Material: ABS + Tempered Glass
USB-C To USB-A Cable included.