Advanced Electro-Ceramic Cooling Module with Smart Semiconductor cooling plate and cooling fan can dramatically decrease the temperature when it is wireless charging. You can actually feel the blizzing cold with your finger!
• Simplicity with refined look matches iPhone with a Fast + Wireless transmitter
• Fully compatible with Qi Standard enabled Smartphones
• Built-in advanced Electro Ceramic Cooling Module
• Dramatically decrease the temperature when it is wireless charging
• Specifically designed with MagSafe compatible magnetic mounting solution
• Instant grip-on when hovering the device near the magnetic area
• Reimagined & Perfect gear to hold the device Extremely Firm and Secure
• Automatically aligns it for charging and improved faster efficiency
• Prevent over-voltage, current, temperature, and short-circuit protection
It delivers a 5W, 7.5W, 10W, and 15W power segment, allows fast charging wirelessly, and is compatible with Qi-enabled Smartphone models.
Input: DC 12V/2~3A; 9V/2~3A
Output: 5W / 7.5W / 10W / 15W
Transmission Distance: ≤10mm
Efficiency: ≥ 80%
Recharge port: USB-C
Dimension: Ø65*42.5 mm
USB-C To USB-A Cable included
Metal Ring plate
Made by Premium Metal material design to attach securely
Only 0.6mm Ultra-thin and easily snap on most Magsafe devices
Durable and stable
• Recommended using with iPhone 14/13/12 models directly and/or worn with official MagSafe protective cases.
• Not recommended to use it with non-MagSafe cases and/or non-Magnetic cases.
• Supports up to 7.5W fast-charging by Qi standard for iPhone 14 requirement.
• Recommended any smartphone models without magnetic feature to use the bundled Magnetic Plate or Metal Ring
• When NTC (Thermistor) detects the ambient temperature is below 20 degrees, the cooling fan and the cooling plate will stop operating until the temperature rises again.
• The cooling fan will stop when the smartphone is removed.
• The cooling plate and cooling fan only work when the input power is above 9V.
• It is recommended to use a Smartphone case with a thickness of less than 2mm
• It will affect the cooling function of the cooling plate if the Smartphone case is thicker than 2mm
• Please be sure the M-CM power holder is connected with the power source before using
• Cannot charge if the smart device is worn with a metal case, or the case is thicker than 3 mm.
• The wireless charging will not work with any non-Qi enabled smartphone
Wireless charging notes:
It uses electromagnetic fields to transfer power from a transmitting source *, to a receiving device * for charging the device’s battery wirelessly
Transmitting source: M-CM Power holder
Receiving device: Qi-enabled Smartphones
Best performance: 3-5mm
Standard: Qi Standard
Fast charging notes
Qi-enabled devices which do not support fast charging will be powered at a standard charging speed
Required a separately sold QC 3.0 Car charger or Car charger higher than 18W to support fast charging
Attention to the power output of the charging source of the car charger will affect the charging speed performance