10% off for newsletter signup

0

Your Cart is Empty

HR00-SQ2MON0G- 179

Tesla Model 3 & Y | EV Car | Center console Monitor | Wind & Dash | Magnetic Car phone holder | Squarer II Mount

SQUARER II Magnetic Car Mount

Powerful magnetic grip. One hand operation. Sleek design.

 

Highlights:

  • Just hover and it locks — one-hand attach, one-hand release
  • 24 high-performance magnets — zero movement on sharp turns
  • Slim square design — low-profile, no blocked vents
  • Works directly with MagSafe — no case removal needed
  • Door to navigation in one second flat 

Overview:
How many seconds do you lose every morning fighting with your car mount? Coffee in one hand, laptop bag in the other, yet you're still wrestling to pry open the clamps, wedge your phone in, lock it down — then fiddle with the angle. Those 15 seconds of chaos set the tone for your entire day.

The SQUARER II was designed to delete that routine entirely. Inside its sleek body sit 24 high-performance neodymium magnets that lock onto your phone with industrial-level grip.

Just hover your phone near the mount — it snaps into place instantly. Navigation lights up. When you arrive, just grab and go. No levers. No squeezing. Just smooth, effortless motion.

And the slim square design? It barely looks like a mount at all. More like a piece of your car's interior that was always meant to be there.

Your car deserves a mount as smart as your phone.

 

Why You'll Love It:

  • Hands full, but you still need to set up navigation→ Hover-to-lock magnetic attachment, one hand only→ From car door to GPS in 1 second, not 15
  • Weak magnets let your phone drop on sharp turns→ 20x N52 + 4x N45 neodymium magnet array→ Stays locked in place, even on the tightest bends
  • Bulky mounts block vents and ruin your car's look→ Slim square design, compact and discreet→ Clean dashboard aesthetic, no clutter
  • New phone isn't MagSafe, so your old magnetic mount is useless→ Free metal ring and plate included→ Any phone becomes magnetic in seconds 

More than a mount. A better way to interact with your car.

Some mounts demand two hands, a firm grip, and a prayer — relics from a bygone era of clunky mechanics. Other magnetic mounts promise a strong hold, but leave you holding your breath through every corner.

We offer something different: true effortlessness. Hover to lock. Grab to go. So secure, you'll forget the word "drop" was ever in your vocabulary. The gap between us and them? It's the gap between "tool" and "experience."

 

Tech Specs:

  • Magnet type: N52 + N45 neodymium, nickel-plated for corrosion resistance
  • Magnet count: 20x N52 + 4x N45 — 24 high-performance magnets total
  • Faceplate material: Fiberglass-reinforced board — prevents slip, boosts magnetic hold
  • Installation: Tool-free, clips directly onto air vent
  • Compatibility:
    • iPhone with MagSafe: Direct magnetic attachment
    • Non-MagSafe phones: Includes free metal ring / metal plate — stick on and go
  • Note: Magnets may slightly affect compass apps — normal function returns when phone is removed 

CAPDASE. For those who drive smarter and demand a better experience.
We design better setups for the way you live and work.

 

Paired with Monitor Arm-179

For the information commander who needs a second screen in the cockpit.

 

Highlights

  • L-shaped clamp. Grips the edge of your center display.
  • Triangular support structure. Metal arm. Zero wobble.
  • 8cm extension plus 270° rotation. Total visual freedom.
  • Silicone padding. Protects your expensive screen.
  • Dual life. Car display or office monitor—works on both. 

Overview

Don't let that new EV have only one screen working. Monitor Arm creates a second tactical window at the display's edge. Shift your glance a few centimeters. Phone info, absorbed. After parking, clip it to your office monitor. Dual-screen efficiency, all day.

Unlock your in-car dual screen. Let your efficiency match your speed.

You're navigating an unfamiliar elevated highway. The car's display shows a complex multi-lane exit diagram. Just then, your passenger messages a changed meetup address. You don't look down. You don't interrupt navigation.

You shift your gaze a few centimeters to the Monitor Arm at the screen's edge, catch the new address, and calmly take the correct exit. This dual-screen command—eyes forward, information in hand, zero panic—is the only reason it exists.

 

Why You Need This

Glancing down at your phone makes you miss exits? Phone at display edge. Lateral glance. Zero danger.

Worried the clamp will scratch your expensive screen? Silicone padding wraps every touchpoint. Tight hold, zero marks.

Only useful in the car feels like a waste? Clip it to your office monitor after parking. Dual-screen workflow, uninterrupted.

Suction cups and vent clips are "finding a place to put your phone." CAPDASE Monitor Arm is "creating a new position for your phone." One is compromise. The other is design.

 

CAPDASE. For those who command information and chase peak efficiency.
We design better setups for the way you live and work.

 

SQUARER II Magnetic Car Mount磁吸車用手機支架

強力磁吸・單手操作・型格設計

 

產品亮點:

  • 一靠即合,單手取放,瀟灑俐落
  • 超強磁力陣列,顛簸過彎絕不偏移
  • 纖薄方形設計,不遮視線不佔空間
  • 無需拆殼,MagSafe直接相容
  • 上車到出發,只需一秒 

產品概述:
你有沒有算過,每天早上上車,你要花多少時間跟支架搏鬥?雙手提著咖啡和公事包,卻還得費力掰開夾臂、塞進手機、扣緊 -最後還要調整角度。那 15秒的狼狽,是每一天混亂的開端。

SQUARER II就是為了終結這種瑣碎而誕生。它內建 24顆高效能釹磁鐵,吸附力道強到像焊上去一樣。你只需單手將手機往上一靠,瞬間鎖定,導航畫面立刻亮起。下車時,一拿即走,乾淨俐落。纖薄的方形設計,不遮擋出風口,不破壞車內美感,更像是一件低調的車內藝術品。

你的車,值得一個和手機一樣聰明的支架。

 

購買理由:

  • 雙手滿載,還要費力裝支架→靠近即吸附,單手完成→上車設定導航,從 15秒變 1秒
  • 磁吸力道不夠,過彎就摔→ 20顆 N52 + 4顆 N45釹磁鐵陣列→顛簸過彎,手機紋絲不動
  • 支架體積龐大,遮擋視線又醜→纖薄方形設計,低調俐落→維持車內美感,不擋出風口
  • 換手機後,舊磁吸支架不相容→隨附金屬貼環,任何手機都能用→一貼即變磁吸,相容零門檻

 

不只是換支架,是換一種與車相處的方式

有些支架,需要你雙手並用、費力掰開,像在操作上個世代的機械。有些磁吸支架,吸力勉強及格,卻總在關鍵過彎時讓你心驚膽跳。

而我們要給你的,是真正的從容:一靠即合,一拿即走,強到讓你忘了「掉落」兩個字怎麼寫。這之間的差距,就是「工具」與「體驗」的距離。

 

技術規格:

  • 磁鐵規格:N52 + N45釹磁鐵,鎳鍍層防鏽處理
  • 磁鐵數量:20顆 N52 + 4顆 N45,共 24顆高效磁鐵陣列
  • 面板材質:玻璃纖維增強面板,防滑並提升磁吸力
  • 安裝方式:免工具,直接固定於出風口
  • 相容性:
    • iPhone MagSafe:直接吸附
    • 非 MagSafe手機:隨附金屬貼環 /金屬片,貼上即可使用
  • 注意事項:磁鐵可能輕微影響指南針應用程式,移除後即恢復正常 

卡登仕CAPDASE.為懂得聰明駕駛、講究體驗的你。
We design better setups for the way you live and work.
 

 

搭配顯示器支架臂-179 | Monitor Arm-179

 

產品亮點:

  • L型夾具,夾持中控螢幕邊角
  • 三角支撐結構,金屬臂零晃動
  • 8cm延伸加270°旋轉,視角自由
  • 矽膠護墊,保護螢幕不刮傷
  • 車內屏幕/室內電腦屏幕兩棲使用 

產品概述:
別讓你新簌的電動車只有一個屏幕在工作。顯示器支架臂-179在屏幕邊角開闢第二戰術視窗,視線平移幾公分就能獲取手機資訊。下車還能夾上辦公屏幕,雙屏幕效率全天候。

解鎖你的車載雙屏幕,讓效率跟上你的速度


你正開著導航行駛在陌生高架橋上,車機顯示複雜的多車道出口圖。此時副駕用手機傳來了更改碰面地點的訊息。你不需要低頭、不需要中斷導航,只需視線平移幾公分,在屏幕角落的顯示器支架臂-179上瞥見新地址,從容駛向正確出口。


這種眼觀六路、資訊在手、絲毫不慌的雙屏幕掌控感,就是它存在的唯一理由。

  • 低頭看手機錯過路口?手機架在雙屏幕邊角,視線平移即看,零危險
  • 擔心夾具刮傷昂貴屏幕?矽膠護墊全面包覆,夾得緊卻零刮痕
  • 只能在車上用太可惜?下車夾上辦公屏幕,雙屏幕工作流全天不斷


吸盤和出風口支架是在「找地方放手機」。卡登仕CAPDASE顯示器支架臂-179是在「為手機創造一個新位置」。前者是妥協,後者是設計。


卡登仕CAPDASE,為駕馭資訊、追求效率極致的你。

We design better setups for the way you live and work。

Advanced Electro-Ceramic Cooling Module

Advanced Electro-Ceramic Cooling Module with Smart Semiconductor cooling plate and cooling fan can dramatically decrease the temperature when it is wireless charging. You can actually feel the blizzing cold with your finger!



With Dual Wireless Charging Coils

Notes:

• When NTC (Thermistor) detects the ambient temperature is below 20 degrees, the cooling fan and the cooling plate will stop operating until the temperature rises again
• The cooling fan will stop when the smartphone is removed
• The cooling plate and cooling fan only work when the input power is above 9V
• It is recommended to use a Smartphone case with a thickness of less than 2mm
• It will affect the cooling function of the cooling plate if the Smartphone case is thicker than 2mm

Gentle reminder:
• Please be sure the A-CM power II mount is connected with the power source before using
• Clamp operate by a soft-touch inductive button located at both sides
• Cannot charge if the Smart device is worn with a metal case or the case is thicker than 3 mm
• The wireless charging and cooling fan will not work with any non-QI enabled smartphone

Wireless charging notes:
It uses electromagnetic fields to transfer power from a transmitting source *, to a receiving device * for charging the device’s battery wirelessly
Transmitting source: A-CM Power II holder
Receiving device: Qi-enabled Smartphones

Fast charging notes:
Qi-enabled devices which do not support fast charging will be powered at a standard charging speed
Required a separately sold QC 3.0 Car charger or Car charger higher than 15W to support fast charging
Attention to the power output of the charging source of the car charger will affect the charging speed performance