HR00-D301
AX Spin
One-Touch Auto-Clamp Dashboard Dock Mount — Full 360° Rotation
Highlights:
Overview:
Weekend road trip. You're driving. Your partner in the passenger seat wants to help navigate. But the mount faces only you. She has to lean over, craning her neck — uncomfortable and unsafe.
You reach over, give the AX Spin a gentle turn. 360° rotation. The map now faces her. She reads out the next turn clearly. No unclipping. No re-mounting. Just shared clarity.
The AX Spin isn't just a phone holder. It's your car's shared-view hub. Place your phone on the smart legs — it auto-grips. Touch the switch — it releases.
The triangle lock design keeps your display rock-steady, even on potholed roads. The silicone base lifts clean, washes with water, and leaves zero residue.
Your navigation doesn't have to belong only to you.
Why You'll Love It:
More than a mount. A shared perspective for the whole car.
Traditional mounts lock you into a single, selfish angle. Want to share? Unclip your phone and hand it over. Their logic: one person, one device.
Our logic: one car, shared. This isn't just a mount. It's your in-car perspective commander.
Buy with total confidence.
Tech Specs:
CAPDASE. For those who share the journey with everyone on board.
We design better setups for the way you live and work.
AX Spin
一鍵自動夾緊式儀錶板底座車載手機支架-360°全方位旋轉
產品亮點:
產品概述:
週末出遊,你開著車,副駕的老婆想幫你看導航。但支架只面向你,她得歪著身子湊過來,既危險又不舒服。你單手輕輕一轉 AX Spin - 360° 旋轉,導航畫面瞬間面向副駕。她清楚地報出下個路口。全程不用拆手機,不用重新夾持。
AX Spin 不只是固定你的手機,它是車內的「共享視角中樞」。一觸自動夾持,輕觸即刻釋放。三角鎖定結構讓畫面在爛路上依然清晰不抖。底座可水洗,想換位置隨時拿起,不留痕跡。
你的導航,不必只屬於你一個人。
購買理由:
不只是換支架,是換一種與全車共享的視角
傳統支架把你鎖在一個固定的視角裡 - 你想分享,得把手機拆下來遞過去。它們設計的邏輯是「一人一機」。
而我們設計的邏輯是「一車共享」。這不是一個支架,這是你的車內視角指揮官。
讓你的購買,毫無負擔
Tech Specs:
卡登仕CAPDASE. 為懂得與全車共享旅程的你。
We design better setups for the way you live and work.
Advanced Electro-Ceramic Cooling Module with Smart Semiconductor cooling plate and cooling fan can dramatically decrease the temperature when it is wireless charging. You can actually feel the blizzing cold with your finger!
• A sleek cradle design with a Fast + Wireless transmitter
• Fully compatible with Qi Standard enabled Smartphones
• With Dual Wireless charging coils
• Compatible with Foldable (folded state) & Flippable phones (both flipped open and close)
• Built-in advanced Electro-Ceramic Cooling Module
• Dramatically decrease the temperature when it is wireless charging
• Innovative and Smart locking system engineered with the inductor
• Automatic gripping your smartphone securely in place and effortless self-release
• Minimizing unpleasant noise by the equipped stepper motor
• Touch at either side to turn on the automated side-clamps mechanism
• Extendable leg compatible with various device's sizes ensures optimal wireless transfer
• Prevent over-voltage, current, temperature, and short-circuit protection
It delivers a 5W, 7.5W, 10W, and 15W power segment, allows fast charging wirelessly, and is compatible with Qi-enabled Smartphone models.
Compatible with Foldable (folded state) & Flippable phones (both flipped open and close)
From 63mm up to 90mm wide, it is compatitble to almost all phone models.
Touch at either side to turn on the automated side-clamps mechanism
Extendable leg compatible with various device's sizes ensures optimal wireless transfer
• When NTC (Thermistor) detects the ambient temperature is below 20 degrees, the cooling fan and the cooling plate will stop operating until the temperature rises again
• The cooling fan will stop when the smartphone is removed
• The cooling plate and cooling fan only work when the input power is above 9V
• It is recommended to use a Smartphone case with a thickness of less than 2mm
• It will affect the cooling function of the cooling plate if the Smartphone case is thicker than 2mm
Gentle reminder:
• Please be sure the A-CM power II mount is connected with the power source before using
• Clamp operate by a soft-touch inductive button located at both sides
• Cannot charge if the Smart device is worn with a metal case or the case is thicker than 3 mm
• The wireless charging and cooling fan will not work with any non-QI enabled smartphone
Wireless charging notes:
It uses electromagnetic fields to transfer power from a transmitting source *, to a receiving device * for charging the device’s battery wirelessly
Transmitting source: A-CM Power II holder
Receiving device: Qi-enabled Smartphones
Fast charging notes:
Qi-enabled devices which do not support fast charging will be powered at a standard charging speed
Required a separately sold QC 3.0 Car charger or Car charger higher than 15W to support fast charging
Attention to the power output of the charging source of the car charger will affect the charging speed performance
Input: DC 12V/2~3A ; 9V/2~3A
Output: 5W / 7.5W / 10W /
15W
Transmission Distance: ≤10mm
Efficiency: ≥ 80%
Recharge port: USB-C
Dimension: Ø72.5*134.5* 75 mm
Clamps width: 53mm – 90mm
Product material: ABS+Tempered
Glass
**Best performance: 3.5mm : Standard: Qi Standard
USB-C To USB-A Cable included