HR00-AI2G01-300
AI Power II-Reel
Wireless Charge + Retractable Cable + Auto Clamp
Highlights:
Overview:
Every morning. Coffee in one hand, phone in the other. You slide into the driver's seat. Before you can navigate, you have to put everything down, pry open a clamp, find a cable, plug it in. Thirty seconds of chaos that sets the tone for your entire day.
The AI Power II-Reel was built to delete that routine. Your phone approaches — the arms sense it and open automatically. Place it down, it locks. Wireless charging starts instantly.
When you arrive, your finger taps the front release button — right where it naturally falls. Arms open. Phone in hand.
The built-in 80cm retractable cable pulls out when you need it, snaps back magnetically when you don't. Your dashboard stays clean. Always.
Your dashboard only needs this one.
Why You'll Love It:
More than a mount. An all-in-one mindset.
Other mounts make you manage three things: find the cable, plug it in, stash the slack. And a fourth: grope around the back for that hidden release button. They solve the holding problem, then hand you new chores.
We put the charger and cable inside the mount, and placed the release button exactly where your finger naturally lands. The gap between us and them? It's the distance between "parts you assemble" and "a system designed around you."
Buy with total confidence.
Tech Specs:
CAPDASE. For those who hate clutter and demand all-in-one efficiency.
We design better setups for the way you live and work.
Paired with Gooseneck Arm 300mm
For the one who commands big rigs and bigger roads.
Highlights
Overview
Stop lunging for your phone across a massive dashboard. This 300mm gooseneck brings the screen right to your eyeline. Add the support base and kill that cheap wobble for good.
Your rig is huge, your dash is deep, your navigation shouldn't be a guessing game. Pull it close. Bend it into place. The screen floats exactly where your eyes need it.
You dominate the vehicle. Now dominate your sightline.
Why You Need This
Long arms usually wobble like crazy. Our optional support base braces against the dashboard—solid as bedrock on the roughest terrain. Finally, peace of mind that lasts the whole haul.
Short arms compromise your view. Generic long arms test your patience. CAPDASE Gooseneck 300mm makes you forget the mount exists. Just endless, unobstructed road ahead.
CAPDASE. For those who command the big picture.
We design better setups for the way you drive.
Optional – pairing with bundled Air Vent-Clip
For the one who always has a backup that still looks good.
Highlights
CAPDASE. For those who think ahead and handle every situation with composure.
AI Power II-Reel
無線充電 + 可伸縮線材 + 自動夾緊手機
產品亮點:
產品概述:
每天早上,你左手咖啡、右手手機,鑽進駕駛座。想設定導航,卻得先放下所有東西,雙手掰開支架、找線、插線。那三十秒的狼狽,是每一天混亂的開端。
AI PowerII-Reel 就是為了終結這種瑣碎而誕生。手機靠近,雙臂自動感應張開,放好即夾緊,無線充電同步啟動。下車時,手指在前方底部按鈕輕輕一觸,雙臂打開,手機到手。內建 80cm 伸縮線,一拉即用,一放磁吸收納,中控台從此乾淨俐落。
你的中控台,只需要這一個。
購買理由模組:
不只是換支架,是換一個一體化整合的思維
別的支架要你管理三件事:找線、插線、收線。還有第四件:摸索那顆藏在背後的釋放按鈕。它們解決了固定,卻創造了新的繁瑣。
而我們,把充電器和線都收進支架裡,把釋放鍵放在你手指自然落下的正前方。這之間的差距,就是「零件拼湊」與「一體思維」的距離。
讓你的購買,毫無負擔
技術規格:
卡登仕CAPDASE. 為討厭雜亂、追求一體效率的你。
We design better setups for the way you live and work.
搭配300毫米鵝頸臂
亮點:
概述:
開大車的你再也不用危險探身去取手機。這支300mm鵝頸臂能把屏幕送到你視線正前方,加上支撐底座,從此告別長臂必晃的廉價感。
大車儀表台太遠,導航看不清?一拉一彎,屏幕浮現眼前。貼身指揮中心。
你的視野有多大,支架就該有多長駕馭你的龐然大物,別讓它駕馭你的視線
購買理由:
· 短臂是委屈你的視線,一般長臂是考驗你的耐心。卡登仕CAPDASE Gooseneck 300mm,讓你忘記支架的存在,只享受無邊的視野。
卡登仕CAPDASE,為懂得掌控全局的你。
We design better setups for the way you drive.
可選 - 與隨附的空調出風口夾搭配使用
亮點:
卡登仕CAPDASE,為考慮周全、從容應對每一種狀況的你。
Advanced Electro-Ceramic Cooling Module with Smart Semiconductor cooling plate and cooling fan can dramatically decrease the temperature when it is wireless charging. You can actually feel the blizzing cold with your finger!
• A sleek cradle design with a Fast + Wireless transmitter
• Fully compatible with Qi Standard enabled Smartphones
• With Dual Wireless charging coils
• Compatible with Foldable (folded state) & Flippable phones (both flipped open and close)
• Built-in advanced Electro-Ceramic Cooling Module
• Dramatically decrease the temperature when it is wireless charging
• Innovative and Smart locking system engineered with the inductor
• Automatic gripping your smartphone securely in place and effortless self-release
• Minimizing unpleasant noise by the equipped stepper motor
• Touch at either side to turn on the automated side-clamps mechanism
• Extendable leg compatible with various device's sizes ensures optimal wireless transfer
• Prevent over-voltage, current, temperature, and short-circuit protection
It delivers a 5W, 7.5W, 10W, and 15W power segment, allows fast charging wirelessly, and is compatible with Qi-enabled Smartphone models.
Compatible with Foldable (folded state) & Flippable phones (both flipped open and close)
From 63mm up to 90mm wide, it is compatitble to almost all phone models.
Touch at either side to turn on the automated side-clamps mechanism
Extendable leg compatible with various device's sizes ensures optimal wireless transfer
• When NTC (Thermistor) detects the ambient temperature is below 20 degrees, the cooling fan and the cooling plate will stop operating until the temperature rises again
• The cooling fan will stop when the smartphone is removed
• The cooling plate and cooling fan only work when the input power is above 9V
• It is recommended to use a Smartphone case with a thickness of less than 2mm
• It will affect the cooling function of the cooling plate if the Smartphone case is thicker than 2mm
Gentle reminder:
• Please be sure the A-CM power II mount is connected with the power source before using
• Clamp operate by a soft-touch inductive button located at both sides
• Cannot charge if the Smart device is worn with a metal case or the case is thicker than 3 mm
• The wireless charging and cooling fan will not work with any non-QI enabled smartphone
Wireless charging notes:
It uses electromagnetic fields to transfer power from a transmitting source *, to a receiving device * for charging the device’s battery wirelessly
Transmitting source: A-CM Power II holder
Receiving device: Qi-enabled Smartphones
Fast charging notes:
Qi-enabled devices which do not support fast charging will be powered at a standard charging speed
Required a separately sold QC 3.0 Car charger or Car charger higher than 15W to support fast charging
Attention to the power output of the charging source of the car charger will affect the charging speed performance
Input: DC 12V/2~3A ; 9V/2~3A
Output: 5W / 7.5W / 10W /
15W
Transmission Distance: ≤10mm
Efficiency: ≥ 80%
Recharge port: USB-C
Dimension: Ø72.5*134.5* 75 mm
Clamps width: 53mm – 90mm
Product material: ABS+Tempered
Glass
**Best performance: 3.5mm : Standard: Qi Standard
USB-C To USB-A Cable included