Tesla Model S, Model X | Custom-Fit Dashboard base lock-MSX | Hook onto the front panel | |15W | Cooling Wireless Charging | MagSafe Car Phone holder | MCM Power III Car Mount

Paired with Tesla DSH Base – MSX

For the flagship driver. Model S. Model X. Never forgotten.

Highlights

• Exclusively designed for Tesla Model S/X flagship vehicles.
• Hook and adhesive mount. Anchors onto the center console/dashboard surface.
• Preserves the wide-open flagship cabin aesthetic.
• Ends the accessory drought for Model S/X owners.
• Soft padding. Protects that premium interior.

CAPDASE Cooling 15w Wireless Charging Mount – MCM Power III

Fast Magnetic Wireless charging + Active COOLING. For MagSafe iPhones & Qi smartphones.

 No more falling, overheating, or slow charging.
Most car chargers overheat, slip, or need perfect alignment. This one doesn’t.

Strong magnetic grip – 8 N-52 neodymium magnets snap your phone instantly into place. No clamps, no slipping, even on bumpy roads.

Active cooling – built‑in electro‑ceramic module with a quiet fan pulls heat away while charging. You feel the cold. Your battery stays safer, charging stays faster.

 Why drivers love it:
• Instant magnetic attachment – just hover and click
• Holds phone firm – no drops, no wobble
• Active cooling prevents overheating
• Fast wireless charging up to 15W
• Works with MagSafe iPhones directly, or use included metal plate for any phone/case
• Ultra‑thin metal ring (0.6mm) – barely visible
• Auto alignment for perfect charging
• Over‑voltage, over‑current, over‑temperature & short‑circuit protection 

What you get:
A cool, rock‑solid magnetic charger. No more overheating, slow charging, or phones falling off the vent. 

Specifications

Input: DC 12V/2~3A; 9V/2~3A
Output: 5W / 7.5W / 10W / 15W
Transmission distance: ≤10mm
Efficiency: ≥80%
Recharge port: USB-C
Dimension: Ø65 × 42.5 mm
Cable included: USB-C to USB-C
Magnetic design: 8 pieces of N-52 neodymium iron bars (4.5mm width each), nickel‑plated
Anti‑slip: Fiberglass board
Cooling: Electro‑ceramic module + semiconductor plate + cooling fan (stepper motor for low noise)
Compatible with: MagSafe iPhones & any Qi‑enabled smartphone
Included accessories: Metal ring plate (0.6mm thin, 53mm diameter) + magnetic plate
Case compatibility: Recommended thickness ≤2mm for best cooling & charging
Fast charging requirement: Needs separately sold QC 3.0 car charger or any >18W car charger
Fast charging support (iPhone): Up to 15W (Qi standard)

 Notes:
• Cooling fan & plate work only when input power >9V
• Cooling fan stops when phone is removed
• Cooling disabled below 20°C ambient temperature (NTC)
• Cannot charge through metal cases or cases >3mm thick
• Non‑Qi phones will not charge wirelessly 

搭配Tesla DSH Base – MSX

產品亮點:

• 專為 Tesla Model S/X 旗艦車型設計
• 掛鉤及張貼式安裝，扣合中控儀表板面上
• 不破壞旗艦座艙的開闊感
• 終結 Model S/X 車主的配件荒
• 軟式護墊，保護內裝不刮傷

CAPDASE 冷卻 15W 無線充電支架 – MCM Power III
快速磁吸無線充電 + 主動冷卻。適用於 MagSafe iPhone 及 Qi 智能手機。

不再跌落、過熱或充電緩慢。
大多數車用充電器會過熱、滑動，或者需要完美對位。這一個不會。

強勁磁吸 – 8 粒 N-52 釹磁鐵，瞬間將手機吸附到位。無需夾具，即使在顛簸路面也不會滑動。

主動冷卻 – 內置電陶冷卻模組及靜音風扇，充電時將熱力帶走。你會摸到冰涼感覺。電池更安全，充電更快速。

車主喜愛的原因：
• 即時磁吸 –只需靠近即可吸附
• 穩固固定手機 – 不會跌落，不會搖晃
• 主動冷卻防止過熱
• 快速無線充電高達 15W
• 可直接用於 MagSafe iPhone，或使用附帶的金屬片用於任何手機/手機殼
• 超薄金屬環（0.6mm）– 幾乎看不見
• 自動對位，完美充電
• 過壓、過流、過熱及短路保護

你會得到：
一個清涼、穩固的磁吸充電器。不再過熱、不再慢速充電、不再有手機從風口跌落的煩惱。

規格
輸入：DC 12V/2~3A；9V/2~3A
輸出：5W / 7.5W / 10W / 15W
傳輸距離：≤10mm
效率：≥80%
充電端口：USB-C
尺寸：Ø65 × 42.5 mm
隨附線材：USB-C 轉 USB-C
磁吸設計：8 粒 N-52 釹鐵磁條（每粒 4.5mm 闊），鍍鎳表面
防滑：玻璃纖維板
冷卻：電陶冷卻模組 + 半導體製冷片 + 散熱風扇（配備步進馬達，低噪音）
兼容：MagSafe iPhone 及任何 Qi 無線充電智能手機
隨附配件：金屬環片（0.6mm 超薄，直徑 53mm）+ 磁吸金屬片
手機殼兼容：建議厚度 ≤2mm，以達最佳冷卻及充電效果
快速充電要求：需另購 QC 3.0 車充或任何 >18W 的車充
iPhone 快速充電支援：高達 15W（Qi 標準）

注意事項：
• 散熱風扇及製冷片僅在輸入功率 >9V 時運作
• 移除手機後散熱風扇會停止
• 當環境溫度低於 20°C 時，冷卻功能會關閉（NTC 熱敏電阻）
• 無法透過金屬手機殼或厚度超過 3mm 的手機殼充電
• 不支援非 Qi 制式的手機進行無線充電

卡登仕CAPDASE，為考慮周全、從容應對每一種狀況的你。