10% off for newsletter signup

0

Your Cart is Empty

HR-TL-SQ2-ZC70

Tesla Model 3 & Y (2023 ~ 2025) | Custom-Fit Vent base – ZC-70 | MagSafe Car Phone holder | Squarer II- Magnetic Car Mount

Paired with Paired with Tesla DSH Base – ZC70

For the one whose Tesla evolved. And so should their mount.

Tesla Dashboard Vent Base serve as foundational adapters or specialized clips designed to fit into Tesla's unique, continuous horizontal dashboard air vent.

 

Highlights

  • Re-engineered for Tesla Model 3/Y (2023–2025) updated vent design.
  • Classic profile. Precision evolution inside.
  • Soft dual-hook. Gentle grip, zero blade damage.
  • Left-hand or right-hand drive. Position freely.
  • Tool-free. Install in seconds. Remove in seconds. 

Overview

Tesla silently tweaked the interior details. ZC70 was already prepared with the answer. Classic design on the outside. Clasp geometry recalibrated for the new model year inside. Every small change your car makes, we've already decoded.

Your Tesla evolved. Your mount should too. Classic outside. Precisely upgraded for you inside.

Tesla moved to the 2024 refresh. Turns out they quietly changed the vent structure. That frustration of being locked out by your own perfectionism—suffocating. ZC70 appeared. The exterior is the classic you trust. The clasp is redesigned for the new-year model. One soft click. Perfect, flush lock. Your Tesla advanced. Your experience advanced with it.

 

Why You Need This

Re-engineered clasp specifically for 2023–2025 model years. Perfect match.

Don't want to settle for a universal mount because of a minor refresh? Vehicle-specific is non-negotiable. That's the Tesla owner's baseline.

If someone tells you to "just use a universal one," CAPDASE says no. Your new-model Tesla demands its own partner.

 

CAPDASE. For those who evolve with the times and never settle.
We design better setups for the way you drive

 

SQUARER II Magnetic Car Mount

Powerful magnetic grip. One hand operation. Sleek design.

 

Highlights:

  • Just hover and it locks — one-hand attach, one-hand release
  • 24 high-performance magnets — zero movement on sharp turns
  • Slim square design — low-profile, no blocked vents
  • Works directly with MagSafe — no case removal needed
  • Door to navigation in one second flat 

Overview:
How many seconds do you lose every morning fighting with your car mount? Coffee in one hand, laptop bag in the other, yet you're still wrestling to pry open the clamps, wedge your phone in, lock it down — then fiddle with the angle. Those 15 seconds of chaos set the tone for your entire day.

The SQUARER II was designed to delete that routine entirely. Inside its sleek body sit 24 high-performance neodymium magnets that lock onto your phone with industrial-level grip.

Just hover your phone near the mount — it snaps into place instantly. Navigation lights up. When you arrive, just grab and go. No levers. No squeezing. Just smooth, effortless motion.

And the slim square design? It barely looks like a mount at all. More like a piece of your car's interior that was always meant to be there.

Your car deserves a mount as smart as your phone.

 

Why You'll Love It:

  • Hands full, but you still need to set up navigation→ Hover-to-lock magnetic attachment, one hand only→ From car door to GPS in 1 second, not 15
  • Weak magnets let your phone drop on sharp turns→ 20x N52 + 4x N45 neodymium magnet array→ Stays locked in place, even on the tightest bends
  • Bulky mounts block vents and ruin your car's look→ Slim square design, compact and discreet→ Clean dashboard aesthetic, no clutter
  • New phone isn't MagSafe, so your old magnetic mount is useless→ Free metal ring and plate included→ Any phone becomes magnetic in seconds 

More than a mount. A better way to interact with your car.

Some mounts demand two hands, a firm grip, and a prayer — relics from a bygone era of clunky mechanics. Other magnetic mounts promise a strong hold, but leave you holding your breath through every corner.

We offer something different: true effortlessness. Hover to lock. Grab to go. So secure, you'll forget the word "drop" was ever in your vocabulary. The gap between us and them? It's the gap between "tool" and "experience."

 

Tech Specs:

  • Magnet type: N52 + N45 neodymium, nickel-plated for corrosion resistance
  • Magnet count: 20x N52 + 4x N45 — 24 high-performance magnets total
  • Faceplate material: Fiberglass-reinforced board — prevents slip, boosts magnetic hold
  • Installation: Tool-free, clips directly onto air vent
  • Compatibility:
    • iPhone with MagSafe: Direct magnetic attachment
    • Non-MagSafe phones: Includes free metal ring / metal plate — stick on and go
  • Note: Magnets may slightly affect compass apps — normal function returns when phone is removed 

CAPDASE. For those who drive smarter and demand a better experience.
We design better setups for the way you live and work.

 

 

搭配Tesla DSH Base – ZC70特斯拉儀表板Model 3/Y (2023~2025)通風口底座

可用作基礎適配器或專用夾子,設計用於安裝在特斯拉獨特的連續儀表板通風口中。

 

產品亮點:

  • 專為 Tesla Model 3/Y (2023~2025)更新扣位
  • 經典設計,內在精準進化
  • 軟式雙鉤,溫柔咬合不傷葉片
  • 左右駕通用,安裝位置自由選
  • 免工具,秒裝秒拆 

產品概述:
當特斯拉默默改了內裝細節,ZC70已為你準備好答案。外型傳承經典,扣位卻為新年式重新校準。你的車每一處細微變化,我們都懂。

特斯拉進化了,你的底座也該跟上傳承經典,內在為你精準升級

特斯拉換到2024年新款,原來原廠默默修改了出風口結構。那種被完美主義拒於門外的沮喪,很悶。
ZC70
就在這時出現。外型是你熟悉的經典模樣,但扣位已為新年份車款重新設計。輕輕一扣,嚴絲合縫。你的特斯拉進化了,你的體驗也同步進化。

 

購買理由:

  • 專為2023-2025新年份車款重新設計扣位,完美匹配
  • 不想為了小改款屈就通用支架?專車專用,不妥協是特斯拉車主的底線

如果要你「將就用通用款」。卡登仕CAPDASE說:不,你的新年式特斯拉,就該有專屬的搭檔。


卡登仕CAPDASE,為與時俱進、絕不將就的你。

We design better setups for the way you drive。 

 

SQUARER II Magnetic Car Mount磁吸車用手機支架

強力磁吸・單手操作・型格設計

 

產品亮點:

  • 一靠即合,單手取放,瀟灑俐落
  • 超強磁力陣列,顛簸過彎絕不偏移
  • 纖薄方形設計,不遮視線不佔空間
  • 無需拆殼,MagSafe直接相容
  • 上車到出發,只需一秒 

產品概述:
你有沒有算過,每天早上上車,你要花多少時間跟支架搏鬥?雙手提著咖啡和公事包,卻還得費力掰開夾臂、塞進手機、扣緊 -最後還要調整角度。那 15秒的狼狽,是每一天混亂的開端。

SQUARER II就是為了終結這種瑣碎而誕生。它內建 24顆高效能釹磁鐵,吸附力道強到像焊上去一樣。你只需單手將手機往上一靠,瞬間鎖定,導航畫面立刻亮起。下車時,一拿即走,乾淨俐落。纖薄的方形設計,不遮擋出風口,不破壞車內美感,更像是一件低調的車內藝術品。

你的車,值得一個和手機一樣聰明的支架。

 

購買理由:

  • 雙手滿載,還要費力裝支架→靠近即吸附,單手完成→上車設定導航,從 15秒變 1秒
  • 磁吸力道不夠,過彎就摔→ 20顆 N52 + 4顆 N45釹磁鐵陣列→顛簸過彎,手機紋絲不動
  • 支架體積龐大,遮擋視線又醜→纖薄方形設計,低調俐落→維持車內美感,不擋出風口
  • 換手機後,舊磁吸支架不相容→隨附金屬貼環,任何手機都能用→一貼即變磁吸,相容零門檻 

不只是換支架,是換一種與車相處的方式

有些支架,需要你雙手並用、費力掰開,像在操作上個世代的機械。有些磁吸支架,吸力勉強及格,卻總在關鍵過彎時讓你心驚膽跳。

而我們要給你的,是真正的從容:一靠即合,一拿即走,強到讓你忘了「掉落」兩個字怎麼寫。這之間的差距,就是「工具」與「體驗」的距離。

 

技術規格:

  • 磁鐵規格:N52 + N45釹磁鐵,鎳鍍層防鏽處理
  • 磁鐵數量:20顆 N52 + 4顆 N45,共 24顆高效磁鐵陣列
  • 面板材質:玻璃纖維增強面板,防滑並提升磁吸力
  • 安裝方式:免工具,直接固定於出風口
  • 相容性:
    • iPhone MagSafe:直接吸附
    • 非 MagSafe手機:隨附金屬貼環 /金屬片,貼上即可使用
  • 注意事項:磁鐵可能輕微影響指南針應用程式,移除後即恢復正常 

卡登仕CAPDASE.為懂得聰明駕駛、講究體驗的你。
We design better setups for the way you live and work.