HR00-VSP01
Power. Hold. Go.
VS Power Mount — Wireless Charging Magnetic Mount
Juice flows. Phone stays.
KEY FEATURES & BENEFITS
• 20kg Vacuum-Lock Foundation:Before you charge, you need to trust. One push, clockwise twist, lock engaged. That's it. The same industrial-grade vacuum system from our VS Circular now powers your charging experience. Your mount isn't going anywhere—even at 80mph on a rough road. No adhesive failure. No midday dashboard collapse. Just permanent installation that happens in seconds.
• 15W Rapid Wireless Charging:Arrive with more battery than you left. Full 15W fast charging for compatible devices means your phone gains power faster than navigation drains it. No more scrambling for cables. No more forgotten chargers at home. Just place, drive, arrive full.
• Aerospace-Grade N52 Magnets:Your phone finds center instantly. That 1.7kg magnetic pull force means perfect alignment every time—critical for consistent charging. Even through cases, the bond feels welded, not attached. Your phone charges because it's perfectly positioned, every single time.
• Intelligent Charging Control: Here's the part we obsessed over: a physical ON/OFF switch.Want to charge? Flip it on. Driving at night and don't need the charge light? Flip it off. Preserve battery cycles when you're already full. You're in control, not the other way around.
• Silent Precision Joint: Find the exact angle that kills dashboard glare without annoying plastic creaking. The metal alloy joint moves silently, holds stubbornly, and stays exactly where you put it. Portrait for messages. Landscape for navigation. Your call.
• Dual-Lock Security Modes:
Mode 1 for daily flexibility.
Mode 2 (Super Lock) for off-road confidence.
One switch adapts to your reality.
• Self-Cleaning Nano-Grip Base: Dust kills other mounts. Yours? Rinse it under water. Air dry. Good as new. Works from -30°C to 80°C because your car isn't climate-controlled.
• Dashboard Solution Kit Included : Textured dashboard? No problem. The included smooth adhesive pad creates the perfect surface, then disappears underneath while the VS Power locks on top.
• Folds Flat When Idle:When you park, fold it down. The streamlined profile sits flush, waiting. Your dashboard returns to looking like a dashboard.
SPECIFICATIONS
Mounting Method: Vacuum suction pump with mechanical lock switch
Hold Strength: 20kg vertical pull resistance
Magnetic Pull Force: 1.7kg (N52 Neodymium magnets)
Wireless Charging: 15W fast charging (Qi-compatible)
Charging Control: Physical ON/OFF switch
Cooling System: Integrated ventilation channel
Compatibility: MagSafe iPhones, All Qi-enabled smartphones (with included metal ring for non-MagSafe devices)
Temperature Range: -30°C to 80°C operational
Base Material: Washable Nano-Grip PU
Joint Type: High-strength metal alloy, 360° silent adjustment
Installation Options: Direct dashboard, windscreen, or included smooth pad for textured surfaces
Dimensions (folded):Compact streamlined profile
Included:VS Power Mount, Dashboard Solution Kit (smooth adhesive pad), metal ring for non-MagSafe devices, USB-C charging cable
Technical Specifications
Materials:Zinc Alloy chassis + ABS/PC V0 fireproof housing
Wireless Standard:Qi Universal
Input:9.0V⎓ 3.0A / 5.0V⎓ 3.0A
Output:15W Max (Auto-adjusts: 15W/10W/7.5W/5W)
Charging Efficiency:≥ 70%
Charge Port:USB-C
Dimensions:Ø74.5 x 41.6(H) mm
Net Weight:153g
Finally, a Charging Mount That Earns Its Spot on Your Dashboard
Meet the VS Power Mount.
Start with the foundation. Before we added a single charging component, we engineered the grip. The same 20kg vacuum-lock system from our VS Circular—one push, clockwise twist, mechanical lock engaged. Your mount becomes part of the car. Not stuck on. Installed.
Now add the magnets. N52 aerospace grade because alignment matters for charging. That 1.7kg pull force doesn't just hold your phone; it positions it perfectly. Every time. The moment your phone approaches, it snaps to center with that authoritative thnk—the sound of perfect alignment.
Then the charging itself. 15 watts. Full speed. But here's where we got clever.
That physical ON/OFF switch.
You know how every wireless charger just... charges? Constantly? Even when your battery's full? Even when you don't need it? We built a switch. Flip it on when you need power. Flip it off when you don't. Preserve your battery cycles. Control your device, rather than letting your device control you.
The joint moves silently because plastic creaking is unacceptable. It adjusts one-handed because you're driving. The base washes clean because dashboard dust is inevitable. The included smooth pad handles textured dashboards that other mounts refuse.
When you're not using it, fold it down. The streamlined profile waits discreetly. Your dashboard looks like a dashboard again.
The VS Power Mount doesn't scream for attention. It doesn't need to.
It just holds your phone perfectly. Charges it reliably. And then gets out of your way.
Because the best charging mount isn't the one with the most features.
It's the one you forget exists—until you need power.
CAPDASE VS Power Mount
Hold tight. Charge fast. Drive free.
Available now for windscreen and dashboard installation.
供電。穩固。出發。
CAPDASE卡登仕 VS Power磁吸無線充電支架 —出風口/儀表板通用版
電力持續供給。手機穩如泰山。
重點特色與效益
• 20公斤真空鎖定基礎:在充電之前,你需要的是信任。輕輕一推,順時針扭轉,鎖定開關扣上。就這樣。我們從 VS Circular延續而來的工業級真空系統,現在為你的充電體驗提供動力。即使時速80英里行駛在顛簸路面,你的支架也絕不動搖。沒有黏膠失效,沒有午後儀表板崩塌。只有數秒內完成的永久安裝。
• 15W快速無線充電:到達目的地時,電力比出發時更滿。相容裝置支援完整的15W快速充電,代表你的手機充電速度比導航耗電更快。從此不再手忙腳亂找充電線,不再擔心忘了帶充電器。只需放上、駕駛、滿電抵達。
•航空航天級N52強力磁鐵:你的手機瞬間精準對位。1.7公斤的磁吸力確保每次完美對位-這對穩定充電至關重要。即使裝著手機殼,那種吸附感就像焊接上去,而不只是附著。你的手機能夠充電,是因為它每次都精準到位。
•智慧充電控制:這是我們最著迷的部分:一個實體的ON/OFF開關。需要充電?打開它。夜間駕駛不想看到充電指示燈?關掉它。當手機電力已滿,保護電池循環壽命。你掌控一切,而不是被裝置掌控。
•靜音精密阻尼轉軸:輕鬆找到能消除儀表板反光的最佳角度,告別惱人的塑料摩擦聲。金屬合金轉軸靜音運作,頑固地停留在你設定的位置。直立看訊息,橫放看導航。隨心所欲。
•雙重鎖定模式:
模式一:日常靈活使用。
模式二(超級鎖定):越野路段信心保證。
一個開關,適應你的真實需求。
•自潔式奈米吸附底座:灰塵會慢慢侵蝕其他支架的壽命。你的呢?用水沖洗,風乾後立即恢復如新。在攝氏-30°C至80°C的極端溫度下依然正常運作,因為你的車內從來不是恆溫環境。
•隨附儀表板安裝輔助墊片:儀表板表面有紋理?沒問題。隨附的平滑黏貼墊片創造出完美的安裝表面,然後隱身於下方,讓 VS Power穩固地鎖定在上方。
•可折疊收納設計:停車後,將支架臂折疊收攏。流線型的輪廓平整收納,低調待命。你的儀表板,回歸它該有的簡潔模樣。
產品規格
安裝方式:真空吸盤泵,附帶機械鎖定開關
承受力度:垂直拉力 20公斤
磁吸力度: 1.7公斤拉力 (採用 N52釹磁鐵)
無線充電: 15W快速充電 (相容 Qi標準)
充電控制:實體 ON/OFF開關
散熱系統:整合式通風通道
相容性:支援MagSafe的iPhone,所有支援 Qi的智能型手機 (非MagSafe裝置:請採用隨附引磁環貼在機背上或手機殼背上)
適用溫度:攝氏 -30°C至 80°C
底座材質:可水洗奈米吸附PU材質
轉軸類型:高強度金屬合金,可360度靜音調整
安裝位置:可直接安裝於儀表板、擋風玻璃,或使用隨附的平滑墊片於紋理表面
折疊後尺寸:緊湊的流線型輪廓
包裝內容: VS Power支架、儀表板安裝輔助墊片、引磁環 (供非MagSafe裝置使用)、USB-C充電線
技術規格
材質:鋅合金機身 + ABS/PC V0防火外殼
無線標準:通用 Qi標準
輸入: 9.0V⎓ 3.0A / 5.0V⎓ 3.0A
輸出: 15W最大 (自動調整: 15W/10W/7.5W/5W)
充電效率: ≥ 70%
充電埠: USB-C
尺寸:直徑 74.5 x 41.6(高)毫米
淨重: 153克
深度賞玩:終於,一個值得佔據你儀表板的充電支架
認識一下 VS Power支架。
從基礎開始。在我們加入任何充電元件之前,我們先從抓力著手。延續自 VS Circular的 20公斤真空鎖定系統 -輕輕一推,順時針扭轉,機械鎖定開關扣上。你的支架成為車體的一部分。不是「貼」上去,而是「安裝」上去。
接著加入磁鐵。選用航空航天級 N52磁鐵,因為對位精準對充電至關重要。那 1.7公斤的磁吸力不僅僅是吸住你的手機;它每次都能完美定位。當你的手機靠近支架,伴隨著一聲強而有力的「噠」瞬間吸附歸位 -這是完美對位的聲音。
然後是充電本身。15瓦。全速。但真正的巧妙之處在這裡:
那個實體的 ON/OFF開關。
你知道嗎,每個無線充電器就是一直充電?不停歇地充?即使你的電池已經滿了?即使你根本不需要?我們加入了一個開關。需要電力時打開它。不需要時關掉它。保護你的電池循環壽命。你掌控裝置,而不是被裝置掌控。
轉軸運作安靜無聲,因為塑料摩擦聲令人無法接受。它可以單手調整,因為你在開車。底座可以水洗清潔,因為儀表板灰塵無可避免。隨附的平滑墊片,讓其他支架束手無策的紋理儀表板也能完美安裝。
當你不需要使用時,將它折疊收起。流線型的輪廓低調待命。你的儀表板,回歸它該有的模樣。
VS Power支架不追求引人注目,因為它不需要。
它只是穩穩地吸住你的手機。可靠地為它充電。然後功成身退,不佔空間。
因為最好的充電支架,不是功能最多的那個。
而是你直到需要電力時,才會想起它的存在。
CAPDASE卡登仕 VS Power磁吸無線充電支架
穩固吸附。快速充電。自由駕駛。
Advanced Electro-Ceramic Cooling Module with Smart Semiconductor cooling plate and cooling fan can dramatically decrease the temperature when it is wireless charging. You can actually feel the blizzing cold with your finger!
• A sleek cradle design with a Fast + Wireless transmitter
• Fully compatible with Qi Standard enabled Smartphones
• With Dual Wireless charging coils
• Compatible with Foldable (folded state) & Flippable phones (both flipped open and close)
• Built-in advanced Electro-Ceramic Cooling Module
• Dramatically decrease the temperature when it is wireless charging
• Innovative and Smart locking system engineered with the inductor
• Automatic gripping your smartphone securely in place and effortless self-release
• Minimizing unpleasant noise by the equipped stepper motor
• Touch at either side to turn on the automated side-clamps mechanism
• Extendable leg compatible with various device's sizes ensures optimal wireless transfer
• Prevent over-voltage, current, temperature, and short-circuit protection
It delivers a 5W, 7.5W, 10W, and 15W power segment, allows fast charging wirelessly, and is compatible with Qi-enabled Smartphone models.
Compatible with Foldable (folded state) & Flippable phones (both flipped open and close)
From 63mm up to 90mm wide, it is compatitble to almost all phone models.
Touch at either side to turn on the automated side-clamps mechanism
Extendable leg compatible with various device's sizes ensures optimal wireless transfer
• When NTC (Thermistor) detects the ambient temperature is below 20 degrees, the cooling fan and the cooling plate will stop operating until the temperature rises again
• The cooling fan will stop when the smartphone is removed
• The cooling plate and cooling fan only work when the input power is above 9V
• It is recommended to use a Smartphone case with a thickness of less than 2mm
• It will affect the cooling function of the cooling plate if the Smartphone case is thicker than 2mm
Gentle reminder:
• Please be sure the A-CM power II mount is connected with the power source before using
• Clamp operate by a soft-touch inductive button located at both sides
• Cannot charge if the Smart device is worn with a metal case or the case is thicker than 3 mm
• The wireless charging and cooling fan will not work with any non-QI enabled smartphone
Wireless charging notes:
It uses electromagnetic fields to transfer power from a transmitting source *, to a receiving device * for charging the device’s battery wirelessly
Transmitting source: A-CM Power II holder
Receiving device: Qi-enabled Smartphones
Fast charging notes:
Qi-enabled devices which do not support fast charging will be powered at a standard charging speed
Required a separately sold QC 3.0 Car charger or Car charger higher than 15W to support fast charging
Attention to the power output of the charging source of the car charger will affect the charging speed performance
Input: DC 12V/2~3A ; 9V/2~3A
Output: 5W / 7.5W / 10W /
15W
Transmission Distance: ≤10mm
Efficiency: ≥ 80%
Recharge port: USB-C
Dimension: Ø72.5*134.5* 75 mm
Clamps width: 53mm – 90mm
Product material: ABS+Tempered
Glass
**Best performance: 3.5mm : Standard: Qi Standard
USB-C To USB-A Cable included