Cooling | 15W Wireless Charging Mount | MagSafe MCM Power III Car Mount | Telescopic Arm

 CAPDASE Cooling 15w Wireless Charging Mount – MCM Power III

Fast Magnetic Wireless charging + Active COOLING. For MagSafe iPhones & Qi smartphones.

No more falling, overheating, or slow charging.
Most car chargers overheat, slip, or need perfect alignment. This one doesn’t.

Strong magnetic grip – 8 N-52 neodymium magnets snap your phone instantly into place. No clamps, no slipping, even on bumpy roads.

Active cooling – built‑in electro‑ceramic module with a quiet fan pulls heat away while charging. You feel the cold. Your battery stays safer, charging stays faster.

Why drivers love it:
• Instant magnetic attachment – just hover and click
• Holds phone firm – no drops, no wobble
• Active cooling prevents overheating
• Fast wireless charging up to 15W
• Works with MagSafe iPhones directly, or use included metal plate for any phone/case
• Ultra‑thin metal ring (0.6mm) – barely visible
• Auto alignment for perfect charging
• Over‑voltage, over‑current, over‑temperature & short‑circuit protection

What you get:
A cool, rock‑solid magnetic charger. No more overheating, slow charging, or phones falling off the vent.

Specifications

Input: DC 12V/2~3A; 9V/2~3A
Output: 5W / 7.5W / 10W / 15W
Transmission distance: ≤10mm
Efficiency: ≥80%
Recharge port: USB-C
Dimension: Ø65 × 42.5 mm
Cable included: USB-C to USB-C
Magnetic design: 8 pieces of N-52 neodymium iron bars (4.5mm width each), nickel‑plated
Anti‑slip: Fiberglass board
Cooling: Electro‑ceramic module + semiconductor plate + cooling fan (stepper motor for low noise)
Compatible with: MagSafe iPhones & any Qi‑enabled smartphone
Included accessories: Metal ring plate (0.6mm thin, 53mm diameter) + magnetic plate
Case compatibility: Recommended thickness ≤2mm for best cooling & charging
Fast charging requirement: Needs separately sold QC 3.0 car charger or any >18W car charger
Fast charging support (iPhone): Up to 15W (Qi standard)

Notes:
• Cooling fan & plate work only when input power >9V
• Cooling fan stops when phone is removed
• Cooling disabled below 20°C ambient temperature (NTC)
• Cannot charge through metal cases or cases >3mm thick
• Non‑Qi phones will not charge wirelessly

Paired with Telescopic Arm-141

For the obsessive who notices "almost right" isn't right at all.

Highlights

• 100-165mm stepless extension. Push back, pull close - your call.
• Locks rigid. Feels like a fixed arm. Zero play.
• 360° ball head. Micro-adjust your view with precision.
• Reinforced vacuum suction. One-click lock, one-click release.
• Anti-wobble structure. Potholes won't blur your map.

Overview

Precision like a camera slider. This telescopic arm kills the "almost there" frustration of fixed mounts. Pull out, lock. Push back, clean. Every adjustment feels like dialing in a scope.

Extend. Lock. Own your perfect sightline. This isn't adjustment. This is calibration.

Late afternoon drive. Sun slants low, your navigation screen is washed in glare. You need to pull the phone closer. But every mount you've tried starts dancing the moment you extend it. Bumpy road plus blurry screen equals instant rage.

Why You Need This

Fixed mounts always leave you "just a little short." 100-165mm stepless extension—find your exact sweet spot, then lock it.

Extended arms usually wobble. Our anti-wobble structure stays rigid at full reach.

Tired of re-adjusting every time you get in? Calibrate once. Lock it. That's your setting forever.

Cheap mounts settle for "close enough." CAPDASE Telescopic Arm demands millimeter precision.

CAPDASE. For the detail-obsessed who refuse to settle.
We design better setups for the way you drive.

Optional – pairing with bundled Air Vent-Clip

For the one who always has a backup that still looks good.

Highlights

• One-click install. Fits most vent types.
• Soft rubber padding. Blades stay pristine.
• Built-in ball head. Angle freely.
• Minimalist design. Doesn't ruin interior flow.

CAPDASE. For those who think ahead and handle every situation with composure.

CAPDASE 冷卻 15W 無線充電支架 – MCM Power III
快速磁吸無線充電 + 主動冷卻。適用於 MagSafe iPhone 及 Qi 智能手機。

不再跌落、過熱或充電緩慢。
大多數車用充電器會過熱、滑動，或者需要完美對位。這一個不會。

強勁磁吸 – 8 粒 N-52 釹磁鐵，瞬間將手機吸附到位。無需夾具，即使在顛簸路面也不會滑動。

主動冷卻 – 內置電陶冷卻模組及靜音風扇，充電時將熱力帶走。你會摸到冰涼感覺。電池更安全，充電更快速。

車主喜愛的原因：
• 即時磁吸 –只需靠近即可吸附
• 穩固固定手機 – 不會跌落，不會搖晃
• 主動冷卻防止過熱
• 快速無線充電高達 15W
• 可直接用於 MagSafe iPhone，或使用附帶的金屬片用於任何手機/手機殼
• 超薄金屬環（0.6mm）– 幾乎看不見
• 自動對位，完美充電
• 過壓、過流、過熱及短路保護

你會得到：
一個清涼、穩固的磁吸充電器。不再過熱、不再慢速充電、不再有手機從風口跌落的煩惱。

規格
輸入：DC 12V/2~3A；9V/2~3A
輸出：5W / 7.5W / 10W / 15W
傳輸距離：≤10mm
效率：≥80%
充電端口：USB-C
尺寸：Ø65 × 42.5 mm
隨附線材：USB-C 轉 USB-C
磁吸設計：8 粒 N-52 釹鐵磁條（每粒 4.5mm 闊），鍍鎳表面
防滑：玻璃纖維板
冷卻：電陶冷卻模組 + 半導體製冷片 + 散熱風扇（配備步進馬達，低噪音）
兼容：MagSafe iPhone 及任何 Qi 無線充電智能手機
隨附配件：金屬環片（0.6mm 超薄，直徑 53mm）+ 磁吸金屬片
手機殼兼容：建議厚度 ≤2mm，以達最佳冷卻及充電效果
快速充電要求：需另購 QC 3.0 車充或任何 >18W 的車充
iPhone 快速充電支援：高達 15W（Qi 標準）

注意事項：
• 散熱風扇及製冷片僅在輸入功率 >9V 時運作
• 移除手機後散熱風扇會停止
• 當環境溫度低於 20°C 時，冷卻功能會關閉（NTC 熱敏電阻）
• 無法透過金屬手機殼或厚度超過 3mm 的手機殼充電
• 不支援非 Qi 制式的手機進行無線充電

搭配伸縮臂-141

亮點:

• 100-165mm無段伸縮，拉近推遠隨你
• 鎖定後穩如固定臂，絕不晃動
• 360°球頭，視角精準校準
• 強化真空吸盤，一鍵鎖定、一鍵釋放
• 防晃結構，爛路也不影響導航清晰度
•  

概述:
像攝影滑軌般精準。這支伸縮臂解決了固定支架「總是差一點」的煩躁，拉出鎖定、收回簡潔，每次調整都是一種精密操作的滿足。

伸縮之間，鎖定你的完美視界這不是調整，這是精準校準

傍晚開車，夕陽斜射，導航螢幕一片眩光。你必須把手機拉近才能看清，但一般支架一拉長就開始跳舞，路感顛簸加上視覺模糊，瞬間煩躁爆表。

購買理由：

• 固定支架總是「差一點點」才完美？100-165mm無段伸縮，拉到最舒服的那個甜蜜點，鎖定
• 拉長之後就開始晃？專利防晃結構，伸到最長依然穩如泰山
• 每次上車都要重調角度？一次校準，鎖定後就是你的專屬設定

一般支架的調整是「差不多就好」的妥協。卡登仕CAPDASE Telescopic Arm 的校準，是「分毫不差」的偏執。

卡登仕CAPDASE，為拒絕將就的細節控。

We design better setups for the way you drive.

可選 - 與隨附的空調出風口夾搭配使用

亮點:

• 一鍵安裝，兼容多數出風口
• 軟膠護墊，不傷葉片
• 內建球頭，角度自由調整
• 極簡設計，不破壞內裝美感

卡登仕CAPDASE，為考慮周全、從容應對每一種狀況的你。