HR00-MS3V01-85
MS Power III | RGB Magnetic Wireless Charging Car Mount
*15W fast charging + magnetic lock + RGB halo*
What You Get
Quick Specs
Why You’ll Love It
No weak grip, no overheating, no boring dashboard. Just a powerful, cool, stylish charge.
Vent Clip-85
Clip. Rest. Go.
Secure vent mount that stays put – fits most horizontal or vertical vents.
Key Benefits
Why You’ll Love It
No slipping. No wobbling. Just a clean, secure vent mount that adjusts exactly where you need it. Install in seconds, remove with one finger.
Quick Specs
Secure your phone in seconds. Get the Vent Clip-85.
MS Power III | RGB 磁吸無線充電車用手機支架
*15W 快充 + 磁力鎖定 + RGB 氛圍燈*
你會得到什麼
快速規格
你會愛上它的原因
不再有鬆脫、過熱或沉悶的錶板。只有強勁、低溫、型格的充電體驗。
Vent Clip-85
夾上。抵住。上路。
穩固不滑動的出風口支架 –適用多數橫向或垂直出風口。
主要效益
為什麼您會愛上它
不滑落、不晃動。就是一款乾淨、穩固的出風口支架,精準調整到您需要的位置。秒速安裝,單指拆除。
快速規格
秒速固定您的手機。Vent Clip-85。
Advanced Electro-Ceramic Cooling Module with Smart Semiconductor cooling plate and cooling fan can dramatically decrease the temperature when it is wireless charging. You can actually feel the blizzing cold with your finger!
• Simplicity with refined look matches iPhone with a Fast + Wireless transmitter
• Fully compatible with Qi Standard enabled Smartphones
• Built-in advanced Electro Ceramic Cooling Module
• Dramatically decrease the temperature when it is wireless charging
• Specifically designed with MagSafe compatible magnetic mounting solution
• Instant grip-on when hovering the device near the magnetic area
• Reimagined & Perfect gear to hold the device Extremely Firm and Secure
• Automatically aligns it for charging and improved faster efficiency
• Prevent over-voltage, current, temperature, and short-circuit protection
It delivers a 5W, 7.5W, 10W, and 15W power segment, allows fast charging wirelessly, and is compatible with Qi-enabled Smartphone models.
Input: DC 12V/2~3A; 9V/2~3A
Output: 5W / 7.5W / 10W / 15W
Transmission Distance: ≤10mm
Efficiency: ≥ 80%
Recharge port: USB-C
Dimension: Ø65*42.5 mm
USB-C To USB-A Cable included
Metal Ring plate
Made by Premium Metal material design to attach securely
Only 0.6mm Ultra-thin and easily snap on most Magsafe devices
Durable and stable
Diameter: 53mm
Thickness: 0.6mm
• Recommended using with iPhone 14/13/12 models directly and/or worn with official MagSafe protective cases.
• Not recommended to use it with non-MagSafe cases and/or non-Magnetic cases.
• Supports up to 7.5W fast-charging by Qi standard for iPhone 14 requirement.
• Recommended any smartphone models without magnetic feature to use the bundled Magnetic Plate or Metal Ring
• When NTC (Thermistor) detects the ambient temperature is below 20 degrees, the cooling fan and the cooling plate will stop operating until the temperature rises again.
• The cooling fan will stop when the smartphone is removed.
• The cooling plate and cooling fan only work when the input power is above 9V.
• It is recommended to use a Smartphone case with a thickness of less than 2mm
• It will affect the cooling function of the cooling plate if the Smartphone case is thicker than 2mm
Gentle reminder:
• Please be sure the M-CM power holder is connected with the power source before using
• Cannot charge if the smart device is worn with a metal case, or the case is thicker than 3 mm.
• The wireless charging will not work with any non-Qi enabled smartphone
Wireless charging notes:
It uses electromagnetic fields to transfer power from a transmitting source *, to a receiving device * for charging the device’s battery wirelessly
Transmitting source: M-CM Power holder
Receiving device: Qi-enabled Smartphones
Best performance: 3-5mm
Standard: Qi Standard
Fast charging notes
Qi-enabled devices which do not support fast charging will be powered at a standard charging speed
Required a separately sold QC 3.0 Car charger or Car charger higher than 18W to support fast charging
Attention to the power output of the charging source of the car charger will affect the charging speed performance