Tesla Model 3, Model Y – 2021-2022 | Custom-Fit Vent base lock-T01 |15W | Cooling Wireless Charging | MagSafe Car Phone holder | MCM Power III Car Mount

Paired with Tesla DSH Base – T01

For the Tesla owner who knew "universal" was never an option.

Tesla Dashboard Vent Base serve as foundational adapters or specialized clips designed to fit into Tesla's unique, continuous horizontal dashboard air vent.

Highlights

• Purpose-built for Tesla Model 3/Y (2021–2022).
• Soft dual-hook design. Locks into that hidden curved vent.
• Zero damage to the vent slot. Zero disruption to the minimalist interior.
• Left-hand or right-hand drive. Universal fit.
• Tool-free. Click and done. 

Overview

Your Tesla deserves better than "it kinda fits." T01 is engineered for that specific curved air vent in Model 3/Y. Soft hooks click in with precision. Like the OEM part Tesla forgot to include. You just found it.

If it doesn't look factory, we won't let it near your car. CAPDASE. Tesla's invisible partner.

You sink into that minimalist, near-empty Tesla cabin. Future-forward, serene. Your eyes trace the flawless interior lines. You already know: no universal mount deserves to be here. Then you notice the T01, perfectly mated to the hidden vent. It looks like an engineer left a part behind and you finally recovered it. It exists. It also doesn't. That effortless perfection is the whole point of vehicle-specific design.

Why You Need This

Universal mounts can't grip that curved Tesla vent? Dual soft hooks are born for this exact arc. Flush fit.

Terrified of damaging the hidden vent assembly? Soft hooks grip gently. Zero harm. Zero scratches.

Don't want a mount ruining that pure minimalist interior? So low-profile it practically disappears.

Many clamps claim they "work." Only CAPDASE cares whether it belongs. One is an uninvited guest. The other is part of your interior.

CAPDASE Cooling 15w Wireless Charging Mount – MCM Power III

Fast Magnetic Wireless charging + Active COOLING. For MagSafe iPhones & Qi smartphones.

No more falling, overheating, or slow charging.
Most car chargers overheat, slip, or need perfect alignment. This one doesn’t.

Strong magnetic grip – 8 N-52 neodymium magnets snap your phone instantly into place. No clamps, no slipping, even on bumpy roads.

Active cooling – built‑in electro‑ceramic module with a quiet fan pulls heat away while charging. You feel the cold. Your battery stays safer, charging stays faster.

Why drivers love it:
• Instant magnetic attachment – just hover and click
• Holds phone firm – no drops, no wobble
• Active cooling prevents overheating
• Fast wireless charging up to 15W
• Works with MagSafe iPhones directly, or use included metal plate for any phone/case
• Ultra‑thin metal ring (0.6mm) – barely visible
• Auto alignment for perfect charging
• Over‑voltage, over‑current, over‑temperature & short‑circuit protection

What you get:
A cool, rock‑solid magnetic charger. No more overheating, slow charging, or phones falling off the vent.

Specifications

Input: DC 12V/2~3A; 9V/2~3A
Output: 5W / 7.5W / 10W / 15W
Transmission distance: ≤10mm
Efficiency: ≥80%
Recharge port: USB-C
Dimension: Ø65 × 42.5 mm
Cable included: USB-C to USB-C
Magnetic design: 8 pieces of N-52 neodymium iron bars (4.5mm width each), nickel‑plated
Anti‑slip: Fiberglass board
Cooling: Electro‑ceramic module + semiconductor plate + cooling fan (stepper motor for low noise)
Compatible with: MagSafe iPhones & any Qi‑enabled smartphone
Included accessories: Metal ring plate (0.6mm thin, 53mm diameter) + magnetic plate
Case compatibility: Recommended thickness ≤2mm for best cooling & charging
Fast charging requirement: Needs separately sold QC 3.0 car charger or any >18W car charger
Fast charging support (iPhone): Up to 15W (Qi standard)

Notes:
• Cooling fan & plate work only when input power >9V
• Cooling fan stops when phone is removed
• Cooling disabled below 20°C ambient temperature (NTC)
• Cannot charge through metal cases or cases >3mm thick
• Non‑Qi phones will not charge wirelessly 

搭配Tesla DSH Base – T01特斯拉儀表板Model 3/Y (2021~2023) 通風口底座

可用作基礎適配器或專用夾子，設計用於安裝在特斯拉獨特的連續儀表板通風口中。

產品亮點:

• 專為 Tesla Model 3/Y (2021~2023) 設計
• 軟式雙鉤，鎖定弧形隱藏出風口
• 不傷風口台，不破壞極簡內裝
• 左右駕通用
• 免工具，一扣即合

 產品概述:
你的特斯拉值得更好的，不是通用款那種「差不多」的將就。T01 專為 Tesla Model 3/Y 弧形出風口設計，軟鉤精準扣合，像原廠遺漏的零件終於被你找到。

如果它看起來不像原廠標配，我們就不會讓它出現在你的車上
卡登仕CAPDASE，特斯拉的隱形搭檔

你坐進那極簡到近乎空無一物的特斯拉座艙，享受未來感十足的旅程。視線掃過完美無瑕的內裝線條，你心裡很清楚：沒有一個通用型支架有資格出現在這裡。

你瞥見那個完美扣合在隱藏出風口上的 T01。它彷彿原廠工程師不小心遺漏的零件，如今被你找到。它存在，卻又像不存在。這種毫不費力的完美感，就是專車專用的意義。

• 通用支架夾不緊特斯拉弧形出風口？雙軟鉤專為這道弧度而生，嚴絲合縫
• 怕夾傷那昂貴的隱藏式出風口？軟式掛鉤溫柔咬合，零傷害、零刮痕
• 不想為了一個支架破壞極簡內裝美感？低調到幾乎看不見，存在感降到最低

很多夾具都說自己「能用」。但 卡登仕CAPDASE 是唯一在乎它是否「融為一體」的。一個是你車上的不速之客，一個是你內裝的一部分。

CAPDASE 冷卻 15W 無線充電支架 – MCM Power III
快速磁吸無線充電 + 主動冷卻。適用於 MagSafe iPhone 及 Qi 智能手機。

不再跌落、過熱或充電緩慢。
大多數車用充電器會過熱、滑動，或者需要完美對位。這一個不會。

強勁磁吸 – 8 粒 N-52 釹磁鐵，瞬間將手機吸附到位。無需夾具，即使在顛簸路面也不會滑動。

主動冷卻 – 內置電陶冷卻模組及靜音風扇，充電時將熱力帶走。你會摸到冰涼感覺。電池更安全，充電更快速。

車主喜愛的原因：
• 即時磁吸 –只需靠近即可吸附
• 穩固固定手機 – 不會跌落，不會搖晃
• 主動冷卻防止過熱
• 快速無線充電高達 15W
• 可直接用於 MagSafe iPhone，或使用附帶的金屬片用於任何手機/手機殼
• 超薄金屬環（0.6mm）– 幾乎看不見
• 自動對位，完美充電
• 過壓、過流、過熱及短路保護

你會得到：
一個清涼、穩固的磁吸充電器。不再過熱、不再慢速充電、不再有手機從風口跌落的煩惱。

規格
輸入：DC 12V/2~3A；9V/2~3A
輸出：5W / 7.5W / 10W / 15W
傳輸距離：≤10mm
效率：≥80%
充電端口：USB-C
尺寸：Ø65 × 42.5 mm
隨附線材：USB-C 轉 USB-C
磁吸設計：8 粒 N-52 釹鐵磁條（每粒 4.5mm 闊），鍍鎳表面
防滑：玻璃纖維板
冷卻：電陶冷卻模組 + 半導體製冷片 + 散熱風扇（配備步進馬達，低噪音）
兼容：MagSafe iPhone 及任何 Qi 無線充電智能手機
隨附配件：金屬環片（0.6mm 超薄，直徑 53mm）+ 磁吸金屬片
手機殼兼容：建議厚度 ≤2mm，以達最佳冷卻及充電效果
快速充電要求：需另購 QC 3.0 車充或任何 >18W 的車充
iPhone 快速充電支援：高達 15W（Qi 標準）

注意事項：
• 散熱風扇及製冷片僅在輸入功率 >9V 時運作
• 移除手機後散熱風扇會停止
• 當環境溫度低於 20°C 時，冷卻功能會關閉（NTC 熱敏電阻）
• 無法透過金屬手機殼或厚度超過 3mm 的手機殼充電
• 不支援非 Qi 制式的手機進行無線充電

卡登仕CAPDASE，為考慮周全、從容應對每一種狀況的你。